Description

Linear Low Density Polyethylene LLDPE copolymer with butene as comonomer which contains antioxidant. It is recommended for general purpose applications. It is suitable for blending with conventional LDPE. Film made from pure our LL ***9 AA has advantages over conventional LDPE: A) better sealing B) higher puncture resistance C) Greater drawdown capability D) Higher tensile strength. E) Neutralizer: Calcium Stearate F) Antioxidant: Irganox ***0, Irganox **8 Applications: *- Food Grade *- Heavy duty sacks, agricultural films, liners. *- Produce bags, stretch film SPECIFICATIONS: *- Melting Flow Rate (2.*6Kg) = 0.9 g/*0min Per ISO ***3 *- Density = **0 Kg/m3 per ISO ***3 *- Tensile Strength at Yield MD/TD = *0/*1 MPa Per ISO **7 *- Tensile Strength at Break = *1/*2 MPa Per ISO **7 *- Elongation at Break MD/TD = **0/**0 % Per ISO **7 *- Tear Strength MD/TD = **5/**0 G/*5Î&frac*4; Per ASTM D***2 *- Dart Drop Impact = **0 g Per ASTM D***9 Low Density Polyethylene LDPE LUPOLEN ***0 H is non Additivated, low density Polyethylene. It is delivered in pellet form. Applications: *- Bags & Pouches *- Film *- Shrink Film *- Blown Film *- Cast Film Advantages: Good Heat Seal Optical Good Processability SPECIFICATIONS: *- Melting Flow Rate Index, MFR = 1.9 g/*0min Per ISO ***3 *- Density = 0.**0 g/cm3 per ISO ***3 *- Tensile Modulus = **0 MPa Per ISO ****1, *2 *- Tensile Stress at Yield = *1 MPa Per ISO ****1, *2 *- Tensile Strength = *6/*8 MPa Per ISO ****1, *3 *- Tensile Strength Break = **0%/**0% % Per ISO ****1, *3 *- Dart Drop Impact (*0 blown film) = **0 gm Per ASTM D***9 *- Vicat softening temp (*0 °C/h *0N) = *4 °C Per ISO **6 *- Haze (*0) = < 6 % Per ASTM D ***3 **- Gloss (*0 °C, *0) = >*0 Per ASTM D ***7 (*0 °C, *0) = **0 Per ASTM D ***7