Description
Main Technical Index:
Voltage:
**0v *0Hz
Power:
1.1 KW/H ***0rpm
Speed of the turning
blade:
*0 rpm
Blade
hardness:
HRC> *0
Width of inputting materials
mouth: **0
mm
Thickness of the shearing
materials:
0.1~0.3 mm
Width of the shearing
strip:
5.1mm*0.*2mm
Weight
:
**0 kg
Size of the
exterior:
***0mmX***0mmX***0mm
Operating
Procedures:
1.Start up the machine and
confirm the shearing and the rolling-up plate operating
direction:
2.Make the turning blades to build
in mutually and adjust the width until the turning blades can tear
off the metal strip.
3. Start up the machine and halt
operations should be made after shearing the metal strip **3
m.
4.Insert the torn-off metal strip
the oblique groove of rolling-up plate for steel strip
respectively
5.Fasten rolling-up plate for
steel strip with the screw cap on the two ends of the rolling-up
bobbin
Points for
Attention:
1.Add some lubricating oil
to oil hole of the bearing socket before starting up the
machine
2.Operator must put on the gloves
in order not to be hurt by the metal strip
3.Check the parallel degree and
the built-in depth of the two turning blade bobbin. Make some
adjustment through regulating the bolts if
necessary.
4.In order to ensure the flatness
of the kerf and the vomiting the materials smoothly, the depth of
built-in blade shouldn’t be too deep ,not more than 1 mm
(convenient for shearing)
5.Operating the machine without
materials .You can input the materials if the machine doesn’t get
stuck or rub anywhere after running for several
minutes.
6.The turning blade ,which is of
great precision ,shouldn’t be dismantled by yourself except in some
special situations.
7.If the knife is blunt after a
long use ,you need to dismantle the whole group of the turning
blade . Process the knife until the edge of the knife appears. You
couldn’t abandon the blades until you make the most use of
them.
The Appropriate
Scope:
Maximum width of the sheared
metal strip: **0 mm
Maximum thickness of the sheared
metal strip: 0.3 mm
The Scope of
Taking On the Responsibility:
Operate according to the
specification, you will enjoy one-year maintenance for free. Or you
will not enjoy it.
Appendixes:
1.Drawing paper of the
easily-damaged
parts:
One copy
2.Report on the quality
control:
One copy
3.Acceptance
certificate:
One copy
4.Specification:
One copy
