Description

1. Overview
The HC***0 could transmit HD/SD-SDIas per SMPTE **4M****6, **2 and **9, with or without embedded audio and data, as well as DVB-ASI over one fiber, single mode or multimode. Signals are equalized and re-clocked prior to fiber optic transmission. The transmitter features a re-clocked and equalized SDI loop through; the receiver features two re-clocked and equalized SDI outputs 

2.  Features
«   *-channel unidirectional HD/SDI signal
«   Range from*9.4Mb/s to 1.**5Gb/s
«   SMPTE **2M (1.**5Gb/s) clock recovery
«   Support all SMPTE **5M standard, **3Mb/s - **0Mb/s
«   Support SMPTE **5M (SDTi), SMPTE **0M (*9.4Mb/s), SMPTE **4M (**0Mb/s),M2S and DVB-ASI (**0Mb/s) standard
«   Output wavelength ***0nm,***0nm and *6 types of CWDM (ITU-T G.**4.2 compliant)
«   **0m automatic cable equalization, all the 1.**5 Gb / s rate below(Belden ***4A)
«   Optional network management system
«   LED status indicators monitor the critical parameters
«   Optional network system
«   Support hot swap
«    Stand-alone, 1U rack mount and 4U rack mount

3.  Specifications
a)  Serial TV, BNC input
Signal standard: SMPTE **2M, **9M, **7M, **5M, **0M, M2S, DVB-ASI, DVB-SSI and Telecom/Datacom rate(*9.4Mb/s - 1.**5Gb/s)
Input number: 1
Reflection loss: >*5DB
Equilibrium: *-*@********************tor: *5&branded; BNC
b) Optics
Channel: 1
Type: single-mode (multimode optional)
Wavelength: ***0nm /***0nm
Reflection loss: > *5dB
Dithering: < 0.2UI
Connector: FC/PC (SC/PC optional
c) Serial TV, BNC output (EO/OE)
Channel: T*2channel loop out, R*2channel output
Signal level: **0mV nominal
Rise/fall time: **0ps indication
Overshoot: < *0% amplitude
Reflection loss: >*5dB
Dithering: < 0.2UI
Connector: *5&branded; BNC
d) Power and environmental indication
Operating temperature: 0°C~**0°C
Pressure: 1A