Sell Split Pressurized Solar Water Heater - 02(1)

Description

Separate pressurized solar water heaters contain three main parts: Solar Collector, Working Station and Water Tank. Solar collector should be installed on the roof or wall. The tank contains double copper coils, and it can be put anywhere you want, thus the whole system is harmonious with the building.

Heat is transferred from solar collector to the tank by controller. Not only solar energy but also other energy can be used for water heating in this system. High efficiency and cost saving. And if the sunshine is not strong enough, the user can use electric heating element for back up. Even if in cloudy or rainy day, the user can enjoy hot water. It is ensured that when using heat pipes no water goes into the tube and there is neither incrustation nor bursting. Moreover, water can go upward at anytime.
Working Principle:
When the temperature difference between solar collector and tank reaches the set value, the controller will start the circulation pump automatically. The circulation pump makes heat-conducting liquid circulate. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank.
When the temperature difference between solar collector and tank doesn't reach the set value, the circulation pump will be shut automatically. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically. The higher copper coil can connect with other energy.

Specifications:
â—† Inner tank: thickness of Titanium Steel: 2mm; thickness of Enamel Coating: 0.5mm.
â—† Outer tank: thickness of Colored Steel Sheet: 0.5 mm
â—† Tank Include: 1.5kw or 2.5kw Electric Heating Element, T