T-shirt Transfer Paper

Description

Suitable for transferring images onto light -colored cotton or cotton-mixed fabrics. It is printed with common color inkjet printers using pigment or dye ink.

The dark Transfer paper is suitable for transferring to black & white or color images onto black or dark cotton, using an iron. While the light one, suitable for transferring to black & white or color images onto white or light-colored cotton or cotton mixed fabrics and cloth-covered mouse pads, also using an iron.

OPERATING PROCESSES AND PRECAUTIONS:

1. Printing
    - Printer setup. In print setup, recommend to select “Photo Quality Inkjet Paper” mode for satisfactory printing results.
    - Print the wishful pattern first onto transfer paper and leave it to dry for about *0 minutes before transferring.
    - Cut out the image, leaving a narrow margin of 5 mm around the pattern edges.

2. Transferring
    - Preheat the heat press machine and set the recommended transfer temperature to ******5°C.
    - Peel the base paper from the printed coating, and the coating would remain as a film-like material.
    - Place the coating onto the textile with the printed (image) side facing upwards.
    - Put a sheet of isolation paper onto the image, with the glossy side of the isolation paper facing towards the image.
    - Transfer for ****0 seconds and then remove the textile, peel the isolation paper after cooled.

3.  Washing
    - It’s best not to wash the textile in *4 hours after transferring.
    - Washing the textile in cold or ****0°C water. Do not wash with strongly alkaline detergents, and no bleach. Avoid rubbing the transferred pattern when hand washing.
    - Do not wring. Line dry in shade recommended.
    - Don’t dry-clean.