Description

Sizes Availability: A(8.5''X*1'') - *0 Sheets, B(*1''X*7'')- *0 Sheets,
A4(**0mm X **7mm)**0 Sheets, A3(**7mm X **0mm)- *0Sheets, *2cm'X*0M rolls
Ink Compatibility: water based Dye & pigment ink.
1.Application
    This product is recommended with wax crayons, Oil pastels, fluorescent markers,color pencil, Mild solvent ink, Eco-solvent ink, sublimation ink, Water based pigment or Dye inkjet ink for white or Light-colored T-shirts, aprons, gift bags, mouse pads, photographs on quilts etc. The transfer peels off easily after it cools or with hot and can be applied with a regular household iron or professional heat press machine.
2. Advantage 
â—†Customize Fabric with favorite photos and color graphics
â—†Designed for vivid results on white or light-colored cotton or cotton/polyester blend fabrics
â—†Ideal for personalizing T-shirts, canvas bags, wool garment, aprons, gift bags, mouse pads, photographs on quilts etc. 
â—†Transfer peels off easily with hot (matte finish) or after cooling (glossy finish) 
â—†Iron on with a regular household iron & Heat Transfer Press machines 
3. Compatibility for Light inkjet Transfers
It can be printed with water based inks in most printers such as:Epson Stylus Photo ***0, R**0, R**0, PRO ***0,branded PIXMA ip***0, ***0, ***0, i***0, ix***0, Pro***0,HP Deskjet ***0, HP Photosmart D***8 , HP Officejet Pro K**0 etc. some of color laser printers:Epson AcuLaser CX*1N, C***0, C***0, Fuji Xerox DocuPrint C**5 A, C***0DX, branded laser shot LBP***0・LBP***0・LBP***0・LBP***0, branded CLC***0・CLC***0・CLC***0・CLC***0, brandediRC***0・***0・***0
4. Printer Recommendations 
1) Store HT***0 in its original packaging in a cool, dry place.
2)  Only print onto the unprinted, coated side of transfer paper, select normal mode and mirror mode on your printer.
3)  Printer settings: normal paper mode using photo quality print quality
4)  Before transferring, leave the printed image to dry for approx.5 minutes, cut out the motif without leaving a margin around the edges. Straight after peel off the transfer film from the paper back.
5)  First print the desired motif onto standard paper to check that the color and size are correct.
6) Compatibility: It is designed to work with water based Dye & pigment ink

5. Iron-on Transfer processing
A. Prepare a stable, heat-resistant surface suitable for ironing on.
B. Preheat the iron to the highest setting, recommended ironing temperature **0°C.
C. Briefly iron the fabric to ensure that it is completely smooth.
D. Before transferring, leave the printed image to dry for approx.5 minutes, cut out the motif without leaving a margin around the edges. 
E. Place the transfer paper onto it with the printed image facing downwards.
F. Do not use the steam function.Make sure that the heat is evenly transferred over the entire area.Iron the transfer paper, applying as much pressure as possible.When moving the iron, less pressure should be given.Don't forget the corners and edges.
G. Continue ironing until you have completely traced the sides of the image. This entire process should take about ****0 seconds for an 8"x *0" image surface. 
H. Peel off the back paper starting at the corner after the ironing process. 
I. You can get glossy finish with cold peel and matte finish with hot peel.
6. Heat press machine Transfer processing.

a. Set heat press machine at **5°C, for *****5 second using high pressure.
b. Briefly heat the fabric for 5 second to ensure that it is completely smooth.
C. Before transferring, leave the printed image to dry for approx.5 minutes, cut out the motif without leaving a margin around the edges. 
d. Place transfer paper onto fabric with the printed image facing downwards.
e. heat press machine at **5°C, for *****5 second.
f. Peel off the back paper starting at the corner.
7. Washing Instructions
1)  waiting *4 hours before washing for the first time(drying time)
2)  Fabrics bearing our transfers are machine-washable up to *0°C, always wash garments inside out.
3)  Do not use aggressive washing detergents or bleach of any kind
4)  Do not tumble-dry
5)  Iron only on the reverse side.  
8. Material Storage
conditions of ****5% Relative Humidity and at a temperature of ****0°C.