Sell STRIPPABLE LIGHT CONVERSION FILM

Description

STRIPPABLE LIGHT CONVERSION FILM
Art. no.:LM-ZHMG-W***0
Color: yellow

Luminous color: white

Color temperature: ***0K
Brightness: highlight

Excitation Light Source: ******0nm chip

Thickness: **0μm

Dimension: A4/0.3m*4m

Main characteristics:

1.   Light conversion film is made of high temperature plastics, which is soft, non-toxic and harmless, and without any radioactive elements. It can be made in many colors with high brightness and uniformity of light.

2.   The film can be exited by blue LED chip with a length lower than **0nm, and emitted all sorts of color of light. The light is of good uniformity, stability and high brightness. And it also can be exited by UV lightsource.

3.   It has excellent salt and detergency resistance (can use detergents to clean);

4.   It has excellent heat and cold resistance. Working temperature is **0~**0℃;

5.   It has good stability of physical and chemical properties, and good mechanical properties.

6.   It contains particles of light with light diffusion function, which can be used instead of diffusion film.   

7.   Wave length of blue light is **7~**0nm tested by color temperature test.

Using methods and precautions:

1.   The film is an optical film, so please note that the light-colored surface face back light source when in use.

2.   It should be working on flat surface and the working temperature is *0~*0℃;

3.   The film can be cut into various shapes and directly placed somewhere (such as circuit boards, light guide plate or chip surface, etc.) to play the role of light conversion;

4.   Light conversion film has a PET plastic layer on the surface. The PET layer is strippable when the film is fixed, and remains only the high temperature resistant conversion layers according to operating requirements;

5.   We can use screen printing design, text and other methods on the surface of light conversion film, forming a backing light;

6.   When the film is being placed on the surface of somewhere, the surface should be cleaned up and make sure there is no oil, dust and so on.

7.   The applicable working environment should not exceed **0℃, otherwise could easily cause material aging and discoloration.

8.   The light conversion film has a certain properties of thermal expansion and contraction, so please do not place the film at will after it was cut, but put it into folder or under heavy pressure so as to prevent from deformation and curling.

Packaging and storing:

1.   Packaging：Packed in roll or sheet. The externalpackage is plastic film.

2.   Storing：Should be stored in ventilated, dry, cool warehouse. The storage temperature is *5 ~ *0℃, and relative humidity is *0 ~ *0%.