Description

CS***0 navigation box supports software from Navitel, IGo***6, IGo8, Garmin etc. In case a new version of the navigation program is released, it can be easily updated as the navigation device is installed into the specially provided place with direct access to SD card.

CS***0 navigation box can be installed into Lexus, Toyota, Mazda, Subaru, Acura, Honda and other cars with built-in color display (including touch screen) and navigation system. The device can be connected to any additional screen with RGB or composite input.

*CS***0 navigation box installation does not cause wiring damage (it is performed without wire cutting off) and allows user to keep the car warranty valid.

• CPU: Samsung ***0 ARM9 **0 MHz
• OSLanguageLocalization: WIN CE 5.0Eng.Rus.(Eng.)
• Memory: Nand *4 MB, SDRAM *4 MB
• Memory card: MMC, mini SD, SD, SDHD up to *6 GB (SDHC depends on the manufacturer)
• Video Out:
  • RGB **0 x **4 (according to the firmware)
  • RGB **0 x **4 (according to the firmware)
• Video Out: 1 x RCA NTSC 3.*8 MHz
• Audio Out:
  • 1 x RCA stereo 0.*5 W
  • 1 x mono jack 3.5 mm (for the speaker)
• USB Host: 1 x Type A (for external devices)
• USB Device: 1 x Mini USB (deactivated)
• Control:
  • 1 x Remote control with a touch pad
  • Touch screen (via USB controller or cable for multimedia receiver) *1
  • Onboard control devices (adapters for Toyota, Lexus, Mazda, Subaru) *2
• GPS:
  • MTK MT***9T
  • Channels: *6
  • Frequency: L1 ***5.*2 MHz
  • Sensitivity ***5 dB
  • Reacquisition: 1 s
  • Protocol: NMEA***3 V3.*1: GPGGA (1 time/1 s), GPGSA (1 time/5 s), GPGSV (1 time /5 s), GPRMC (1 time /1 s), GPVTG (1 time/1s), (additionally GLL or MTK NMEA Command)
  • HotWarmCold start: < ****0 s
  • Antenna: SMA active (cable length 5m)
• Power supply: *0~*0 V DC
• Main board dimensions: **0 mm x **0 mm x *6 mm
• Weight: 1.**0 kg

1 USB controller and cables for multimedia receivers are not included in the package
2 Adapters for Toyota, Lexus, Mazda, Subaru are sold only together with navigation box.

• Default way for navigation software installation on memory card: NaviNavi.exe
• Navigation software settings:
  • GPS receiver COM port: COM1
  • GPS receiver rate: ***0
  • Video output resolution: **0×**4

• CS***0 navigation box
• Remote control
• GPS antenna
• External speaker
• 2 GB SD memory card
• 2.5 m power cable
• Data cable
• RGB cable (9 Pin)