Sell Lead Acid Battery Auto-pulser Rejuvenator Desulfator Recover

 

Batteries often fail because “sulfates” slowly develop and cover the battery plates. This sulfating process also weakens the electrolyte and this combined with the gradual coating of the plates slowly and almost imperceptibly reduces the battery’s ability to receive, store and then deliver power. This sulfating process gradually impairs battery function and causes a capacity loss until the battery can no longer perform the desired task and so the battery is deemed to have “failed”. However using an Auto Pulse Battery Desulfator can reverse the process by dissolving the sulfates, cleaning the plates and restoring the electrolyte strength so improving a battery’s life and capacity for an extended period. The Auto Pulse Battery Desulfator/Rejuvenator/Recoveryunit uses no external power and generates a high-frequency pulse to dissolve a batteries “sulfates”.

The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline sulfates to dissolve back into the electrolyte and so restoring battery function and electrolyte strength regaining the batteries ability to receive charging current and deliver discharge current.

 

Many desulfator products use an old technology inductor design to generate the pulse to desulfate a battery.  This old technology creates a harsh inductor peak that can be damaging to the battery plates.

 

Utilising our new capacity pulsing method a “soft” peak is generated so dissolving sulfates without damaging the battery plates.

 

Old technology also requires a large inductor so necessitating a physically large desulfator device whereas using our advanced technology design the Auto Pulse Desulfator device is very compact yet provides BIG performance.

 

 

In a similar manner to a Pulse battery charger (charge – rest –charge – rest etc) a cyclic desulfating pulse function (pulse – rest – pulse – rest etc) optimizes a batteries recovery process. This method of desulfation has been implemented in the new Auto Pulse Desulfator

 

 

l        Increases Battery Power

l        Extends Battery Life

l        Battery Charge Faster

l        Longer Discharge

l        Prevents Sulfate Build-up

l        Reduces Evaporation

l        Fully Automatic voltage selection. *2V *4V *6V and *8V

l        New Cyclic pulse generation method for improved capacity recovery

l        “Soft” Peak Pulsing

l        Auto cutoff function to prevent over discharge of battery

l        User Configurable override for manual voltage selection:

 

 

If the battery voltage is very low the automatic voltage selection may fail to set the correct voltage. In this instance it is possible to manually set the desired operating voltage. By pressing the voltage select button. The LED screen will first display the working voltage and if you want to then alter the working voltage setting just press the key again and the unit will change to next value. After setting the desired voltage the display will switch off to conserve battery power.

Size: *8**6**3mm

Model: Auto-JR*1

Auto-setting for ****8V battery

Working Amp: *0mA max

Peak Amp: 2A max

Peak Voltage: *****0V

Pulse Frequency: *0,**0HZ

LED light indicates when pulse working

Cutoff amp: <5mA