Description

JMY**9, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO****3A, ISO****3B and imitates the USB keyboard to read and output the card data. JMY**9 is reader module with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the module imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card. The default of the JMY**9 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader. There are 2 SAM card slots in the reader. If the users need read the SAM card and use the SAM to cooperate with the operation, and then you can contact us, we will help you do the job.

    Qualifications:
PCD: NXP RC**2, RC**3
Working frequency: *3.*6MHz
RF standard: ISO****3A, ISO****3B
Operating distance: *0mm (Mifare One, typical distance)
SAM card slot: 2 slots, (supported ISO***6 T=0 and T=1)
Interface: USB (HID standard)
Power supply: DC5V
Power consumption: **0mA
Dimension: **3mm**8mm**5mm
Weight: about **0g
Operating temperature: **5 ~ **5 centigrade
Storage temperature: **0 ~ ***5 centigrade