The mesh welding line is feed from wire coil and mesh out in mesh roll.

CE certificate

High efficiency

Pneumatic and cross wire space auto-adjusted

Parameter:

Welded wire mesh machine is the specialized equipment for wire mesh fence. This machine welds the line wires and cross wires of the steel to be solid mesh in the principle of multi-electrode resistance welding. It consists of welded equipment, line and cross wires feeding device, mesh stepping system, mesh laying and convey device, pneumatic system, electrical control system and cooling system. The material can be rolled ribbed steel wire, cold or hot rolled round steel wire.

Its welding system is made up of the rack, welding transformer, pressurized cylinder, upper electrode combination, lower electrode combination, cross wire magnetic locator, lift mesh unit, line wire bracket combination, pneumatic system, water cooling system and others spare parts.

The welding system is designed for smooth and ribbed wire

Welding strokes ranges from ****0 strokes per min

Main lower electrode combination spacing is **0mm, *0 extra lower electrode combination set as spare for the line wire spacing is **0mm.

Copper electrodes used are of good quality

Cross wire: **8mm, pre-cut

Line wire: **8mm, in coil

Mesh width: ***0mm/***0mm/***0mm/***0mm

Welded no.: *0 or according to the mesh width and mesh opening

Transformer: 8***5KVA

Line wire distance: **0,**0,**0 mm

Cross wire distance:   *****0 mm, Endless adjustable

Max. welding frequency:    *0 Times/min

Pneumatic system pressure: more than 0.8 Mpa

Pressure of cooling water: 0.**0.4Mpa

Consumption of compressed air: more than 4M3/min

Mesh tolerance: 2 mm/m

Dimension(L*W*H): *0*3.2*2. m

Total weight   : About *5T