Description
Model Number:
A; NXP RC**2; ISO****3A
C; NXP RC**3;
ISO****3A.ISO****3B
MR**1 series, based on NXP PCD, is the desktop reader. The reader
supports series IC cards according to ISO****3A, ISO****3B and
outputs the data by the way of simulation keyboard through USB
interface. MR**1 IC card is desktop reader with USB interface (HID
standard). In the systems of Windows, Linux and other PC systems
support USB keyboard, the reader imitates the USB keyboard to
operate the card data. With our software and DIP switch, the users
can set the reader if to read the number of the card or the data of
the card or both. And the data can be positive sequence output or
be reverse order output. Meanwhile the users can choose freely the
key output such as enter, tab etc. after the output of the number
and the data of the card.The default of the MR**1 is configuration
mode in factory setting. If you want to let the reader work, you
need deploy it through the software and input the configuration
information to the reader. The reader embeds 2 SAM card slots. If
the users need read the SAM card and use the SAM to cooperate with
the operation, and then you can contact us, we will help you do the
job.
Qualifications:
PCD: NXP RC**2, RC**3
Working frequency: *3.*6MHz
RF standard: ISO****3A, ISO****3B
Operating distance: *0mm (Mifare One,
typical distance)
SAM card slot: 2 slots, (supported ISO***6
T=0 and T=1)
Interface: USB (HID standard)
Power supply: DC5V
Power consumption: 0.6W
Dimension: **3mm×*8mm×*5mm
Weight: about **0g
Operating temperature: **5 ~ **5 ℃ (**7
~ ***5°F)
Storage temperature: **0 ~ ***5 ℃ (***4
~ ***7°F)
