c-glass roving

Description

C-glass Roving is produced by no twist strand through parallel winding to form a cylindrical package. The different roving adopt different composition, linear density and size can separately used for the FRP produced through SMC, BMC, spray up, filament winding and pultrusion process.

C-glass Roving:
1. Free of fuzz, dirt, impurity and other stains
2. Fast wet-out
3. Even thickness
4. Good covering and degassing properties
5. High mechanical strength and high wet strength retention

C-glass Roving:
C-glass Roving are wound onto a paper tube which has an inside diameter of *9mm, and the roll has a diameter of **0mm. The roll is wrapped up with plastic film, and then packed in a cardboard box or wrapped up with kraft paper. The rolls are stacked horizontally. For transportation the rolls can be loaded into a container directly or onto pallet.

C-glass Roving:
Unless otherwise specified, C-glass roving products should be stored in a dry, cool and rain-proof area. The room temperature and humidity should be always maintained at *5 ℃ ~ *5 ℃, and *5% ~ *5% respectively.