Description
Vertical plum pay-off machine DV*****0
The VP series of inverted vertical pay-off machine is developed,
designed and manufactured by our company, is a kind of equipment
for wire collection and drawing after heat treatment. It is
applicable for coil collection, winding of quenched stainless steel
wire, coil winding of bright drawing and PB quenching steel wire.
The features: continuous production, large coil, cycloidal speed
reducer, AC varialbe-frequency control, smooth stepless speed
regulation.
Note: Special design upon requirement and technical parameters of
customers is available.
| Typical model |
Unit |
DV***0 |
DV**0 |
DV**0 |
DV**0 |
| Reel diameter |
mm |
**0 |
**0 |
**0 |
**0 |
| Diameter of discharging(charging) |
mm |
*2.**6.0 |
7.**3.0 |
5.**2.0 |
3.**1.0 |
| Speed of discharging(charging) |
m/min |
＜*0 |
＜*0 |
＜*5 |
＜*0 |
| Motor power |
kw |
5.**3.0 |
3.**2.2 |
2.**1.0 |
0.*5 |
(2)Trunk take-up machine ZXA*******0
The trunk discharging machine is developed on the basis of
international advanced technology for discharging high intensity
wires after continuous drawing. It can realize discharging without
shutdown the drawing machine to improve the efficiency of
continuous drawing machine and reduce consumption of wires.
Compared with Chinese common trunk discharging machine, it has an
additional calibration module that the straightness of steel were
is improved. Its capstan applies water cooling+ air cooling. Water
cooling for calibration module can improve the quality of steel
wire. It is especially suitable for the discharging after the
drawing of high intensity steel wire.
Main technical parameter:
| NO |
Items |
Unit |
Name ZXA******0 |
| 1 |
Diameter of discharging capstan |
mm |
Ф******0 |
| 2 |
Diamere of discharging (charging) |
mm |
Ф1.**3.5 |
| 3 |
Speed of discharging (charging) |
m/min |
 |
| 4 |
Intensity of discharging (charging) |
Mpa |
********0 |
| 5 |
Motor power |
kw |
****5 |
| 6 |
Dimension |
mm |
***0×***0×***0 |
| 7 |
Weight |
t |
2.5 |
(3) Spool *******0 Spool take-up machine SG series developed,
designed and manufactured by Wuxi Pingsheng Science &
Technology Co., Ltd. is applicable for straight line drawing
machine, wet drawing machine,dry drawing machine. Features: common
V band or variable-frequency motor, polished rod or silk rod array,
manual or electric lockup, spool ascending via rotation of conical
sharpening or automatically via rotation of conical sharpening or
automatically via electrics.
Note: speed and tightening facility are available upon customers’
requirements.
