Description
Electroplating wastewater recycling equipment
Electroplating wastewater recycling equipment ， total
recovery is more than *5%, waste water through the waste water
recovery system realize the recycling, so can save more than *5%
wastewater pollution cost. The system adopts advanced special new
membrane separation technology, simple process, operation is stable
and reliable, high treatment efficiency. This system not only can
effectively save the limited water resources, so as to reduce the
consumption of water resources, alleviate the increasingly
prominent contradiction between water stress, and can reduce the
sewage discharge, reduce the pollution of water around, to improve
the human living environment. Waste water recycling cost per ton
can fall to about RMB ï¿¥2 yuan. Recycled water can supply water
purification system or direct reuse to production line. Has the
good economic efficiency, **3 years at the beginning of the
recycling set cost.
Long source water treatment focus resources wastewater reuse field,
committed to the water treatment field of engineering and technical
services, to provide the best process systems and solutions. Have
comprehensive wastewater reuse technology: electroplating
wastewater reuse and precious metal recovery, printed circuit
board, printing and dyeing, liquid crystal display (LCD), food,
paper, electronics and semiconductors, leather, electric power,
chemical industry and other production wastewater reuse, products
cleaning water recycling use and reuse of sewage treatment.
The membrane separation electroplating wastewater zero discharge
technology, electroplating wastewater recycling equipment system
has the following advantages:
1, has the good economic efficiency, **3 years at the beginning of
the recycling set cost.
2, PCB, enterprise wastewater *5% - *0% recovery.
3, recycling water quality stability in the **0 us/cm below.
4, waste water recycling cost per ton can fall to about RMB ï¿¥2
yuan.
5, in the industrial zone in the limit of water or water, can use
this recovery equipment ensure the production
6, the manufacturer to expand production, do not need to increase
the waste water treatment equipment and emissions.
7, automatic continuous system suitable for large flow of waste
water recycling.
8, recycled water can supply water purification system or direct
reuse to production line.
Recycling water production quality
After being treated the effluent can meet the electroplating water
standards, specific see table below
Acid and alkali waste water reuse project
PH 2.5 6.5 6.5 7.5
COD < **0 mg/L < 5 mg/L
Conductivity acuities ***0 ~ ***0 μ s/cm or less *0 μ s/cm
Total copper < **0 mg/l < 0.*5 mg/l
Total nickel < *0 mg/l < 0.*5 mg/l
Electroplating wastewater reuse process equipment
characteristics
*6 system adopts advanced special new membrane separation
technology, simple process, operation is stable and reliable, high
treatment efficiency,
*6 this process give full play to the advantages of special
membrane, plating and circuit board wastewater treatment by this
process, the wastewater valuable metal ion (nickel, copper,
chromium, etc.) through the membrane can be concentrated to
recovery, waste water treatment by membrane through liquid can be
used as process water reuse, not only save cost, and realize zero
discharge of wastewater,
*6 the electromechanical integration design system, a high degree
of automation, operation maintenance is simple, easy to
standardized management;
*6 system cover an area of an area small, less auxiliary
facilities, economic and reasonable configuration, less investment,
low operating cost,
Our specialty is you feel tired a pot of tea fragrance, shenzhen
long source water treatment, water quality improvement expert, your
reliable partner!
Look forward to cooperating with you!
