Description
The
description of ***3 China European Version Coarse stone
mills:
The
finished size under 3 mm.The capacity (ton/hour) ranges from *0T/H
to **0T/H
***3
China European Version Coarse stone mills is engaging in crushing various rocks and stones
with comprehensive strength not higher than **0 MPa into coarse
powder and small particles, it is widely used in metallurgy,
mining, chemical, cement, coal, sand-making, coal gangue,
construction, refractory materials and ceramic
industries.
Advantages and features of ***3 China European
Version Coarse stone mills:
â— High
capacity and low power consumption;
â— Uniform
particle size with high crushing and crushing ratio;
â— Simple
structure;
â— Easy
operation; low investment.
***3
China European Version Coarse stone millsmainly consists of frame, rotor, support iron and
grate bars.
The
working principle of ***3 China European Version Coarse stone
mills:
The
frame is divided into two parts: upper part and lower part, which
are welded by steel plates after being cut. Liners made of high
manganese steels within the frame can be replaced after being worn
out. The rotors consist of turn plates, pin shafts, and hammers
which are grouped regularly in the main shaft. The main unit drives
the main shaft through the motor and triangle belts, which, in
turn, rotates the rollers. Large materials entering the crusher
through the feed inlet are firstly crushed by the high-speed
hammers, and then thrown fiercely to the support iron for further
crushing. Qualified materials crushed will be screened out and exit
from the gap of the grate bars while the unqualified will be left
in the crushing cavity to be further hammered and ground until
reach the standard size.
The
size of the final product can be adjusted by changing the grate
bars. The gap between the rotors and the grate bars can also be
adjusted according to different requirement. To avoid the plugging
of the crusher, the proportion of water for the crushing materials
is no more than *0%.