Description

1. PRECIPITATED CaCO3: For producing Emulsion Paint.

* SPECIFICATION:
1. Whiteness: > *8.*0 %
2. Reduce on **5 mesh: > *9.*0 %
3. pH value: 9 + 0.*0 pH
4. Density: 0.*6 gr/cc
5. DOP Absorption: > *5.*0 cc/**0gr
6. Water Absorption: > *5.*0 cc/**0gr
7. Ignition loss: *2.*0 %
8. Moisture: <</span> 0.*0 %
9. CaCO3 content: > *8.*0 %
*0. Insoluble in HCL: 0.*0 %

* USAGE:
- Paper Industry: In paper coatings for brightness, smoothness, opacity and ink receptivity.
 - Rubber Industry: Increase the structure inside and abrasivity in tire manufacturing.
 - Paint Industry: PCC is used in processing oil-paint and emulsion-paint in order to increase the contact area and adhesion strength.

2. CACO3 COMPOUND: Forproducing PP yarn/ PP Woven bags (PP based) and HDPE( High – Density polyethylene) shopping bags (PE Based).

* SPECIFICATION:
Items / Method of experiment:EFPE *0 Based , EFPE *5 Based , EFPE *0 Based
CaCO3 Content/ ASTM D ***0:*0 ± 2 wt % , *5 ± 2 wt % , *0 ± 2 wt %
Color:Natural White
Particle Size / MALVEM:3 µm
Bulk Density / ASTM D***5:1.*2 g/cm3 , 1.*6 g/cm3 , 1.*3 g/cm3
Melt Mass-Flow Rate / ASTM D ***8:(**0oC/2.*6kgs) and *2 g/*0 mins, (**0oC/2.*6kgs) and 8 g/*0 mins, (**0oC/5kgs) and *1 g/*0 mins
Melt Temperature / DSC:**0 oC
Water Content / ASTM D **4:< 0.*5 wt %
Using Field:For HDPE/ LDPE shopping bag and other HDPE/LDPE products.

Items / Method of experiment:EFPP *0 Based , EFPP *5 Based , EFPP *0 Based
CaCO3 Content/ ASTM D ***0: *0 ± 2 wt % , *5 ± 2 wt % , *0 ± 2 wt %
Color: Natural White
Particle Size / MALVEM: 3 µm
Bulk Density / ASTM D***5: 1.*2 g/cm3 , 1.*5 g/cm3 , 1.*2 g/cm3
Melt Mass-Flow Rate / ASTM D ***8: (**0oC/2.*6kgs) and *8.5 g/*0 mins, (**0oC/2.*6kgs) and *9 g/*0 mins, (**0oC/2.*6kgs) and *8 g/*0 mins
Melt Temperature / DSC:**2 oC
Water Content / ASTM D **4:< 0.*5 wt %
Using Field:For PP Yarn / PP Woven Bag and other PP products.

* USAGE: CaCO3 Compound (Filler) is used as fillers for plastics, increasing the hardness, bright color and no color for the air, reduce product cost, reduced life expectancy when plastic products end use value, easy to decompose.

• Improved to dimensional stability, printability , heat resistance
• Improved to flexural rigidity , productivityReduce raw material cost and white pigment saving
• The finished products are solid-looking like plaster works Anti-blocking effects
  

Content of CaCO3: ≥ *8 % 
Content of MgO: ≤ 0.*6 % 
Content of Fe2O3: ≤ 0.*1 % 
Content of Al2O3: ≤ 0.*4 %
Content of SiO2: ≤ 0.*1 %
Content of Na2O: ≤ 0.*6 % 
Whiteness: ≥ *6.5 % 
pH value: 8.0 ÷ 9.0
Moisture: ≤ 0.2 %
Proportion: 2.7g/cm3
Oil Absorption: ≥ *4g/**0g CaCO3
Loss on ignition: ≤ *3.*8 %