Sell UM-2 Ultrasonic Thickness Gauge

Description

UM*2 is a high-end ultrasonic thickness gauge with high resolution and performance to do the test.

Besides all the features of UM*1,UM*2 has the following functions:
1.0.*1mm resolution
2.Built-in 7 compensating lines

  UM*2 Ultrasonic Thickness Gauge 

Standard package: 
UM*2 thickness gauge 
Standard probe (PT**8) 
Carrying case 
Two 1.5V AA alkaline batteries 
Couplant 
Operating manual 
Certification of quality 
Packaging list 

Operating principle: Ultrasonic pulse/echo method with dual-element probes 

Probe zero adjustment: 
Selectable: *-point calibration: Normal measurement 
*-point calibration: Curve surface measurement or other special application with a high precision 

V-path correction: Automatic 

Measuring range: 
0.8mm to **0mm; 0.**1in to *1.*1in 
Depending on probe, material and surface condition 

Digital resolution: 
H<4in: 0.**1in /0.*1in or 0.*1mm/0.1mm 
H≥ 4in: 0.*1in or 0.1mm 

Units: Selectable: Inch or mm 

Display: 
**8× *4 DOT-matrix LCD screen (1.*5in× 2.*4in; *2mm× *7mm) 
EL backlight and switchable contract ratio 
Digit height: 0.*4in or *3.*5mm 

Measurement update rate: 
4 Hz in standard measurement mode 
*5 Hz in MIN capture mode 

Material velocity range: ***0 to ***9 m/s; 0.**9 to 0.**4 inch/µ S 

Power: 
Two 1.5V AA alkaline batteries 
Warning with low battery voltage 

Operating time: Up to **0 hours (without backlight) with alkaline batteries, depending on operating mode 

Auto shut-off: After 5 minutes of non-use 

Operating temperature: 
**0degree Centigrade to **0degree Centigrade; **4degrees Fahrenheit to ***2degrees Fahrenheit 
Specification to **0degree Centigrade/*4degrees Fahrenheit on request 

Size: 5.*6in× 2.*7in× 1.*5in; **9mm× *3mm× *2mm (H× W× D) 

Weight: **0g; 7oz (including batteries) 

Data logger capacity: Up to **0 readings can be divided into a maximum of 5 files (user-selectable) 

Optional accessories: 
Attachable rubber case 
Numerous special probes on request 
Couplants and high-temperature couplant 
*-step/*-step block for calibration 
Data transmission cable 
Application software 
Operating language: 
English and Chinese 

Measuring error: 
Up to 1in: ± 0.**2in or ± 0.*5mm 
Above 1in: ± 0.5%H 
H is the height of the testing object 

Repeatability: ± 0.**1in or ± 0.**5mm 

Application software: UMVIEW 

Interfaces: 
Serial RS **2C port in combination with a communicative cable; 
Data transfer parameters: 8 bits, 1 stop bit, ***0 baud, no parity.