Description

User’s Manual of Remote Control Training Collar                     Mode: E***7
Futures
1 One remote controller can control two receivers ( one remote controller can control two dogs ).
2 The six different static impulse and the vibration call can adapt to the needs of different situations . It is safe for the pet.
3 The conductive rubber electrode  is soft and the static impulse can penetrate the hair of the pet. It is comfortable for the pet to wear.
4 The strongest static impulse can quickly and effectively curb the improper deeds of the pet.
5 The vibration call can help the master communicate with the pet gently.
6 With the vibration induction switch in it, the receiver will be turned on or turned off automatically , which can prolong the life of the batteries.
7 The collar is waterproof .Just use it without worry.
8 The soft remote controller antenna is anti-broken.
Preparation before using
1 Check that batteries are installed in the remote controller and the receiver.
2 Checking the remote controller: Press the buttons on the remote controller one by one, the indicator light will light, and it will make a “BB” sound. If the indicator light doesn’t light or goes dim, change the batteries.
3.The central button on the remote controller can control the vibration of two receivers at the same time.
4 The three left buttons and the three right buttons on the remote controller control different receivers. Please distinguish the colour of the indicator light of the receiver and the dog wearing the corresponding receiver. You just need to remember that the dog corresponds with the left buttons or the right buttons.
5 Checking the receiver: With the vibration induction switch in it, the receiver will be turned on automatically upon shaking and then the receiver will be in the standby state. The receiver will be automatically turned off when it is in stillness for more than 2 to 3 minutes, so as to save the electricity.
6 Please notice the colour of the power indicator light on the receiver and the colour of the cover, and correspond them with the left buttons or the right buttons on the remote controller.
7 Connect the collar and the receiver. Adjust the length of the collar so that it suits the neck of your pet best. Don’t make it too tight while the discharging point of the receiver can touch the neck of the pet.
8 Press the vibration button(the central button) on the remote controller , the receiver will vibrate . It can give some information to the dog by the fixed rhythm vibration and training .
9 There are two lines of static impulse buttons on the remote controller , the right ones (1, 2, 3 )and the left ones(4 ,5, 6) control different receivers .When pressing it , the discharging point will release static . The discharging state can be checked by the testing light. The 1 button and the 4 button are the strongest ones, the 2 button and the 5 button are placed in the middle ,and the 3 button and the 6 button are weakest . The static impulse has effect of punishing. The master can choose a appropriate static impulse degree according to the temper of the dog.
*0 The static impulse of the collar is to curb the improper deeds of the pet. After each successful check, the master should let the pet know what should be done and what should not be done. After a number of training the pet will understand what its master likes and doesn’t like.
*1 We suggest you give the dog weaker vibration before starting the static impulse. After a time of training, the vibration or the weak static can also curb the improper deeds of the pet effectively. The static impulse only acts as a menace that might be unnecessary most of the time.
*2 Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training.
Operational instructions:
1 Open the insert buckle of the collar and put the collar round the neck of the pet. Adjust the tightness of collar. Don’t make it too tight while the discharging point of the receiver can touch the neck of the pet.
2 Most pets feel uncomfortable at first wearing the collar. Don’t use any of the functions at that time until you are sure that the pet has gotten used to the collar. The static impulse is to curb the improper deeds of the pet. Don’t use it casually or to make fun of the pet.
3 The static impulse can be strong or weak. Training the dog is to let it associate the static with the vibration. Reduce using the static gradually.
4 The strong static impulse is only used in emergency.
5 If you don’t use this product, take the collar and receiver off the dog and place them in a place without vibration, so as to prolong the lifetime of the batteries.
6 If you don’t use the collar receiver for a long time, take out the batteries