Description

GHM ISO copper ore processing equipment _flotation machine Description:
 
SF Ore Flotation Separator (Flotation separator) is mainly used for sorting of copper, zinc, lead, nickel, gold and other non-ferrous metals, ferrous metals and can also be used for the roughing and selected non-metallic. Sorting machine driven by the impeller rotation V-belt drive motor, a centrifugal role in the formation of negative pressure, on the one hand inhalation of sufficient air and slurry mixture, while stirring the pulp mixed with drugs, while refined bubbles, the bubble above the mineral glue, floating to the surface and then form a slurry bubble mineralization. Adjust the ram height, control surface, so that was useful for foam scraper scrapings.
 
ISO copper ore processing equipment _flotation machine Structure Drawing:
 
SF Ore Flotation Separator Mechanism
Heavy-duty spindle bearing assembly
Heavy-duty bearings
Low maintenance
Heavy constructed standpipes
Urethane or rubber impeller and diffusers
Special coating of all wetted parts (optional)
 copper ore processing equipment _flotation machine Features And Advantages:
 
It increase concentrate grade by **6%.
It increase cycling rate by 8%.
It increase production by *2%.
 
Heavy-duty construction
Low maintenance
Efficient operation
Replaceable wear components
Single or double overflow
 
1.Each cell  has three functions:inhale, absorb the pulp and flotation.
2.Big air inlet amount, low energy consumption.
3.Reasonable circulation of pulp decreases coarse sand sedimentation.
4. Automatic and electric control.
5. Process is easy to be changed.
 
copper ore processing equipment _flotation machine Working Principle And Working steps:
 
Working steps
 
1) After intensively mixed, the pulp and medicaments are fed to the groove bottom of the first tank.
 
2) When the impeller of the flotation machine begins to rotate, negative pressure is formed, making the air and pulps at the bottom and middle part of the tank enter the mixing zone. The pulp, air and medicaments are then mixed in the mixing zone.
 
3) As a result of the centrifugal force, the blended pulps are lead to the mineralization area. The air is in full contact with the coal particle and forms mineralized bubbles which are then equally distributed to groove wall and removed upward to the separation region. These bubbles then gather as a foam layer and are discharged by the scraping tool. Finally, clean coal foam is produced by this flotation machine.
 
copper ore processing equipment _flotation machine workingPrinciple:
During the flotation process, pulp will be mixed with drug firstly and agitated. When the Ore Flotation Machine works, the impeller is rotated by V-belt of motor and produces centrifugal effect with negative pressure. Enough air is inhaled into mixed pulp, and pulp mixes with drug at the same time.After being mixed with drug, mineral sticks on bubble completely and floats on the surface of pulp to form mineralized bubble. Useful bubble is scraped out by adjusting flashboard height and controlling liquid surface, so the separating purpose is finished.