FOB Price
أحصل على آخر سعر800 ~ 2000 / Ton
|Minimum Order
Place of Origin:
China
Price for Minimum Order:
Minimum Order Quantity:
10 Ton
Packaging Detail:
kraft paper bags with plastic bags inside 25kg/bag 16ton/20'FCL 25ton/40'FCL
Delivery Time:
Within 15-21days after accept the payment
Supplying Ability:
200 Ton per Month
Payment Type:
T/T, Western Union
الشخص الذي يمكن الاتصال به wilma-cn.annachem1.035119
No 75 Chongqing Road Innan Economic Development Area, Lanzhou, Gansu
PE(HDPE/LDPE/LLDPE/MDPE)/polyethylene
Protective Film
Specificication of PE(HDPE/LDPE/LLDPE/MDPE)/polyethylene
HDPE:
|
HDPE cable material Property |
Unit |
Typical Value |
|
Mass density |
g/cm 3 |
0.****0.**9 |
|
Melt flow Rate(**0 centidegree /2.*6kg) |
g/*0min |
≤1.0 |
|
Tensile yield strength |
MPa |
≥*9.0 |
|
Flexural modulus |
Mpa |
≥**5 |
|
% |
≥**0 |
|
|
Impact Embrittlement temperature |
centidegree |
MAX ***8 |
|
Dielectric Constant |
**0KHZ |
2.*2 |
|
1MHZ |
2.*1 |
|
|
Loss Tangent |
**0KHZ |
MAX 0.***1 |
|
1MHZ |
MAX 0.***1 |
|
|
Volume resistivity |
OHM-CM |
MIN 1x*0 *5 |
|
Application |
Mainly used for the production of high toughness of the telephone, cable insulation material |
|
LDPE:
|
Physical Properties |
Test Method |
Nominal Value |
Unit |
|
|
Density |
ISO ***3 |
0.**1 |
g/cm3 |
|
|
Melt Mass-Flow Rate (MFR) |
ISO ***3 |
1.9 |
g/*0min |
|
|
Hardness |
|
|
|
|
|
Shore Hardness (shore D) |
ISO **8 |
*5 |
|
|
|
Mechanical Properties |
|
|
|
|
|
Tensile Modulus |
ISO ****2 |
**5 |
MPa |
|
|
Tensile Strength |
Yield, |
ISO ****2 |
9.0 |
MPa |
|
Break, |
*3.0 |
MPa |
||
|
Tensile Strain(Break) |
ISO ****2 |
**0 |
% |
|
|
Modulus of Elasticity |
Internal Method |
**0 |
MPa |
|
|
Thermal |
|
|
|
|
|
Vicat Softening Temperature |
ISO **6/A*0 |
*9.0 |
°C |
|
|
Melting Temperature (DSC) |
DIN ****5 |
**8 |
°C |
|
|
Peak Crystallization Temperature (DSC) |
DIN ****5 |
*7.0 |
°C |
|
|
Heat of Fusion |
DIN ****5 |
**0 |
J/g |
|
|
Electrical |
|
|
|
|
|
Volume Resistivity |
ASTM D**7 |
8.5E**5 |
ohm •cm |
|
|
Dielectric Strength |
ASTM D**9 |
*0.0 |
kV/mm |
|
|
Dielectric Constant (*0Hz) |
ASTM D**0 |
2.*0 |
% |
|
|
Dissipation Factor (*0 Hz) |
ASTM D**0 |
0.****0 |
||
LLDPE
|
Properties |
Test method |
Test data |
Unit |
|
Density |
|
0.*1 |
|
|
MFI |
|
2 |
|
|
Drop impact strength |
ASTM D****9 |
*0 |
g |
|
Elongation ,vertical/horizontal |
ASTM D***2 |
**0/**0 |
% |
|
tensilestrength,thermal resistance |
ASTM D****4 |
**5/*5 |
Kg/cm |
|
elongation |
ASTM D***8 |
**0 |
% |
|
tensile strength |
ASTM D***8 |
**0 |
|
|
tensile strength,vertical/horizontal |
ASTM D***2 |
**0/**0 |
|
|
Vicat softening point |
ASTM D****5 |
**3 |
°C |
|
melting point |
ASTM D****7 |
**6 |
°C |
|
Turbidity |
ASTM D****9 |
*2 |
% |
|
*5 glossness |
ASTM D****7 |
*5 |
% |
Features:
1. Our protective film is easy to
attach and remove.
2. It leaves no residue glue or
trace on the surface of material after being peeled off.
3. It can be printed with company\'s
logo, trademark, advertising messages, technical documents,
etc.
4. The protective film can
protect the target surface from pollution, corrosion and scratches
during production, transportation, storage and installation,
etc.
Application:
1. Fiber (Carpet, Textiles, Upholstery, etc.)
2. Film (Shopping bags, casting film, multilayer film, etc.)
3. Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
4. Extrusion Molding (Sheet, Pipe, Wire & Cable, etc.)
5. Injection Molding (Automotive, Electronic, Construction, House wares, Furniture, Toys, etc.)
