Description

1. Use.
As the preparatory cleaner, the machine is located between the bale plucker and the multi-mixer. It’s used to evenly and densely beat raw materials in freedom several several times, to remove bigger trashes, and to flexibly open raw materials so as to avoid the fiber damage.
2. Characteristics
a. Equipped with a microfiber extraction device (suction mouth) inside the machine to efficiently control the increase of short fibers (at the rear upper side of roller there equipped with a mesh plate and suction pipes).
b. Adopt V-shaped beaters to freely beat materials5.5 circles, then output them and meanwhile remove bigger trashes.
c. Adopt four groups of grid bars A, B, C, D, with angle adjustable; with the setting angle changing from small to big, the droppings will increase to get high trash extraction.
d. The droppings output is composed of droppings carriage, leather flap roller, output motor and the clear sequence control program.
e. Adopt the transmission of frequency control for the V-shaped beater, and the speed can be adjusted among******0rpm according to technology requirements.
3. Technical parameters
Production≤**0kg/h, width1.6m
Spiked roller size: dia.**0x***4, speed; mechanical adjusting**6, **2, **5rpm frequency control normally ******0rpm, generally**0rpm
Dust bar type: *8pcs
Setting: 5.***1mm Setting angle:5°**0°
The main motor: Y**2M*4 7.5Kw, ***0 rpm, 
The carriage motor: BWDO**0.*7Kw ***0rpm
Overall size(mm): ***2x***2x***0 (LXWXH)