Description

Features :
    Great Planes Giant Scale *8% Extra **0S ARF GPMA***0
    Construction: Built-up balsa and ply airframe, sheeted foam turtle deck with balsa sheeting, full deflection throws and double beveled control surfaces
    Wings: Two-piece wing panels with aluminum joiner tube
    Horizontal Stabilizer: Two-piece with carbon fiber joiner tube
    Radio Compartment: Located under canopy, plywood reinforced
    Covering: Top Flite MonoKote
    Cowl: Carbon-fiber/fiberglass, painted to match covering
    Cockpit Detail: Instrument panel and painted pilot head
    Canopy: Clear, integrated with hatch, removal allows access to electronics and battery packs
    Landing Gear: Carbon-fiber
    Main Wheels: 5" (**7mm) Du-Bro, constructed of rubber
    Tailwheel: Adjustable aluminum
    Landing Gear Fairings: Painted fiberglass
    Aileron Control: Four servo, prehinged with giant scale hinge point hinges
    Pilot Figure: Lightweight painted fiberglass
    Fuel Tank: *9oz (***0cc)
    Spinner: Polished aluminum 4" (**2mm) diameter
    Stabilizer: Bolt-on halves with prebuilt servo pockets, carbon fiber tubes
    Rudder: Pull-pull design with three servo set-up, dual ball bearing supported tiller arm and aluminum servo tray
    Hardware: Complete giant scale set with all-aluminum servo arms (normally an extra-cost add-on)
    Building Time: Ready to fly in **8 hours
    Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.

Specifications :
    Wingspan: **0.5" (***5mm)
    Wing Area: ***9 sq in (**7 sq dm)
    Weight: *6 - *8lb (*6.3 - *7.2kg)
    Wing Loading: *6 - *8 oz/sq ft (**1 - **7g/sq dm)
    Length: **3" (***6mm)
    Airfoil: Fully symmetrical
    Center of Gravity: **3/4" (**6mm) Back from the wing\'s leading edge measured at the wing tips
    Control Throws- Low Rate High Rate 3D
    Ailerons: Up & Down **3/8" (*5mm) 2" (*0mm) **1/2" (*0mm)
    Elevator: Up & Down 1" (*5mm) **3/4" (*5mm) **3/4" (**0mm)
    Rudder: Right & Left 5" (**0mm) 7" (**0mm) 8" (**0mm)

Contents :
Pre-built and covered wing and fuselage sections, aluminum spinner, instrument panel, wheel pants, wheels, all hardware including aluminum servo arms and servo tray, pilot head, and manual

MOQ Price : USD**4.*0 (NEGO)