Description

Cable Jointing Kits deliver wonderful insulating and sealing performance with heat shrinkable and resin compound materials. 

These established materials kind the premise of straight and branch Cable Joints for voltages up to 1 kv.
 Cable Joints Features:
Simple and fast installation - no process time
Immediate backfill
Immediate energisation
Unrestricted time period (**0°C to **0°C)
Excellent electrical insulation
Outstanding atmosphere resistance
Proven mechanical strength
Re-entrability
Slim profile
Gel Joint
Power gel stuffed cable joints for single and multi-core polymeric cables 0.6/1kV
Easy installation
Three size for straight and branch cable joints are offered, vary for single core cables from ten up to *0mm2 and for *-

core cables since 1.5 up to *6mm2
cable jointing  kits are the simple, "roll-on" technique to insulate and seal cable connections up to **2 kV
five sizes cover all common low voltage cable jointing kits kinds from #8 AWG****0 kcmil (*****0 mm2)
Easy tool free installation
Repeatable results
Fast and simple installation
Reliable protection meets UL, ANSI, CSA values
Superior insulation
Long service life
Resin/Hardener (Guroflex )
Features:
Cold pour – Safe to use
FNo hazard classification – Safe to use
Excellent electrical properties – Solves MV bulk-insulation problems
Tested to international performance principles for applications up to *6 kv
Thoroughly tested to universal performance standards
Cures to a soft solid – No seepage problems
No \'topping-up\' or waiting time – Immediate energisation
Unpretentious by water and time-honoured oil-based insulating compounds
Insensitive to temperature – are often put in in cold or hot close conditions
Can be re-entered or off from its enclosure after curative
 Medium Voltage cable jointing kits
 Medium Voltage cable jointing kits RAYFIT- New Generation MV Joints Up to *6 kV Today\'s jointing technology is needed to 

be less complicated and added economical until now provides higher levels of reliableness and adaptability for operators 

who are under increasing pressure to boost network potency. Rayfit achieves these objectives and has extra valuable options
Features
High recovery forces
Reduced installation time
Slim and area saving intend
Rayfit represents the new generation of heat shrinkable jointing technology. It\'s supported a triple-extruded heat-

shrinkable elastomeric joint sleeve constituent. The system is appropriate for paper and polymeric cable constructions and 

is intended to accommodate fashionable cable jointing necessities like mechanical shear bolt connectors.
 joint sleeve
The triple layer heat-shrinkable joint sleeve combines :
Features
Heat-shrinkable outer conductive layer
Heat-shrinkable insulation layer
Elastomeric insulation layer
Features
Triple-extruded body provides a pre-engineered cable joints unit with fewer kit gears
The reduced overall joint diameter provides a slimmer and area saving profile
Advanced shrink performance and profile-following square measure combined with a major reduction in shrink time
As another to crimp connectors, kits will be hand-picked with mechanical shear bolt connectors for conductor and protect 

continuity
High recovery forces end in tight electrical interfaces and ideal protection ability
Unlimited shelf-life simplifies material supplying and reduces price
Optimized heat transfer owing to reduced thermal capability
RICS
Insulated adapter termination system for SF*-insulated switchgear up to *4kV.
Features
Compact style simplifies installation method
Guaranteed uninterrupted operation, even beneath the acute environmental conditions with severe pollution
Conform to IEC **0, VDE ***8 and ANSI IEEE **6 specifications
Single size fitting will be used for an oversized variety of cable jointing cross sections and increasing their 

reliableness
HVS-X - Raychem HVS-X Multi-layer In-line Joints
Features
Range taking style
Wrap around outer sleeve
Fast, straightforward and permanent
Compact style
Cost Effective
MXSW - Raychem MXSW Single Layer In-line Joints with Mechanical Connectors
Features
No crimping tools or tool maintenance needed
Short and area saving style
Unlimited period of time
Advanced heat shrink behaviour owing to triple co-extrusion technology
SXSW - Raychem SXSW Single Layer In-line Joints with Crimping Connectors
Features
Excellent protection ability owing to elastomeric technologies
Covers most crimp connecter sizes and technologies
Advanced heat shrink behaviour owing to triple extrusion technology
SXSW - Raychem SXSW Single Layer In-line Joints with Crimping Connectors
Features
Excellent protection ability owing to elastomeric technologies
Covers most crimp connecter sizes and technologies
Advanced heat shrink behaviour owing to triple extrusion technology
EPKE - Live End Seals for *2 KV and *4 kV single core plastic cable
Features
A full business line with merely 2 totally different sizes.
Suitable for each wire and tape shielded cables.
Installation requirements no yearn for extraordinary tools. (E.g. crimps, etc)
Same insulation equipment as Raychem cable joints.
Energizing will occur forthwith when installation.
Heat-shrinkable medium voltage branch joints for single core compound cables up to *4 kV
Features
Shear bolt connecter
Connector and insulation in one cable jointing kit
Range taking kit
Compact, robust and burnable
Wide scope of application
Space saving, low total prices
High Voltage/EHV Cable Jointing Kits
The elastomeric Raychem *2 kV cable joints are appropriate for all polymeric cables and be capable of accommodate varied 

cross-bonding defend break and external grounding arrangements.
 Quick cable preparation : No yearn for insulation sanding or pencilling
 Simplified installation : No specialists needed. A certified medium-voltage cable joints person will be trained in single 

day.
Pre-engineered wall thickness : Every part of product dimensions are set and checked at the industrial plant before the 

merchandise is shipped to the countryside.
Time savings : Suitable to short installation time outages are kept to a minimum in repair situations.
High Trustworthiness    : The mix of long expertise and rigorous testing to international standards results in high cable 

joints loyalty.
Link Boxes for High Voltage Cable Systems
Using its familiarity and knowledge within the field of material design, Raychem has pioneered a number of the foremost 

necessary technical advances in cable accessory technology.
Link boxes and sheath voltage limiters (SVL)
Link boxes are used with cable joints and terminations to produce easy accessibility to defend breaks for check functions 

and to limit voltage build-up on the sheath. Lightning, fault currents and switching operations will cause over voltages on 

the cable sheath. The link box optimizes loss management within the cable defend on cables grounded either side.
Features
Direct grounding
Compact design
Single point bonding
Stainless steel
Cross bonding
Hermetically sealed
Cross bonding and transposition
*-phase and *-phase boxes
Sheath voltage limiters (SVL)
EHVS (Heat Shrink)(Up to *6kV)
EHVS (Single Piece, 3 Piece)(*6kV above)
Quick cable preparation
-
No need for insulation sanding or pencilling
Simplified Installation
-
No need for insulation sanding or pencilling
Short Outages
-
The combination of long practiced and rigorous testing to international standards results in high cable joint reliability