Description
| Condition |
New |
| Place of Origin |
Hunan, China (Mainland) |
| Brand Name |
Realtop |
| Model Number |
DG***0 |
| Dimension(L*W*H) |
***0****0****0mm |
| Weight |
***0kg |
| Certification |
ISO****0 |
| Warranty |
*2 months |
| After-sales Service Provided |
Engineers available to service
machinery overseas |
| small size |
Colors are according to buyer's
requriements |
1. Introduction:
Remote-controlled Slurry Balance Pipe-Jacking Tunneling Machine is
a new advanced non-digging-equipment with high technology.
It combines multi-disciplinary technologies in one, such as the
machinery units, hydraulic system, electric controller (including
PLC), Laser system, measuring device, etc.
Besides the high efficiency, it also has no effect on the traffics
on surface. Furthermore, it is good for the environment, and can
lower the cost of the construction.
2. Appliation scope:
For trechless underground pipe laying projects, eg. Sewage, water
supply, discharging projects, cables, tunnel...
3. Specifications:
*3.1 Fit in soft soil, clay, sandy soil, gravel soil, hard soil,
etc. Wide range of soil body;
*3.2 Breakage ability strong, breakage particle size and number
more;
*3.3 With independence water and slurry injection system and
washing clean device for cutter in particular; Fit for big N value
hard soil;
*3.4 Jackng speed is very fast, thoery max, speed is **0mm per
min.
*3.5 Operation precision high, adjust the direction from up and
down, left and right, Max. Corrective angle is 2.5 degree.
*3.6 jacking distance can be long;
*3.7 Adopt ground operation system, safe, intuition and
convenient!
*3.8 Structure firm, use and maintain easy, convenient for
dismantling in work tunnel receiving tunnel.
4. Delivery time:
Within two months afte receiving the deposit;
5. After sell service
We will send special techncian to buyer's project site to operate
the machine and train operators for the first section of the
project, usually **0m/**0/**0m etc. (free of charge)
Longer distance service is available in charge!
6. Hot model technical parameters
| Model: DG****-QNP |
Parameter |
| Main machine dimension |
Inner diameter (mm) |
***0 |
| Outer diameter (mm) |
 ***0 |
| Total length (mm) |
***0 |
| Cutting Part |
Electromotor Power (kW) |
 *0*4 |
| Cutterhead Torque (kN*m) |
 **3 |
| Cutterhead Rotating Speed (r/min) |
2 |
| oil cylinder of rectifying |
Qty |
8 |
| Thrust Force (kN) |
 **0 |
| Stroke (mm) |
**0 |
| Rectifying Angle (°) |
 ±2 |
| Hydraulic System |
Electromotor Power (kW) |
 5.5 |
| Work Pressure (MPa) |
 *5 |
| Slurry system |
Water Supply Pump Power (kW) |
 *5 |
| Mud Pump Power (kW) |
 *5 |
| Diameter of Side Mud pipes (mm) |
 **0 |
| Main Jacking system |
Jacking Speed (mm/min) |
 ****0 |
| Work Pressure (MPa) |
 *1.5 |
| Rated Jacking Force (kNm) |
 ***0×8 |
| Timing Way |
 Adopt Frequency Control |
7. Information needed for quotation accordingly:
7.1 Project total length, distance for one section, how many
secntions will be built?
7.2 Pipe type: Concrete or steel etc, single length of the pipe?
Outer and inner diameter?
7.3 Projects information: For water supply, sewage project?
7.4 Underground water level;
7.5 Soil type? Sol report is needed.
7. Hot models with technical data for your reference.
Thanks for your information! Your reply will be replied within one
working days!
Best Regards
Ms. Aileen Zhu
