Sell INTERIOR EGGSHELL FINISH

Description

PRODUCT DATA

• Remanufactured

• Low Odor

• Environmentally Preferred

• Excellent Quality

• Interior Latex Eggshell Finish

• Excellent Adhesion

• Easy Application

• Soap & Water Clean-Up

                                                       

DRYING                                       

• To Touch *0 - *0 minutes

• To Re-coat 4 - 6 hours

• Times may vary depending

on environmental conditions,

Temperatures & humidity

 

PHYSICAL PROPERTIES

• Finish: EGGSHELL

• ***5% *@********************p>• Approximately *5% Volume Solids

• Package Viscosity *****1O KU

• Approximately ******0 sq. ft. per gal

• 1.5 to 1.7 Mils DFT

 

 

APPLICATION METHODS

Product may be applied with brush, roller or airless sprayer. Maintain a 'wet edge" and apply coating uniformly. Do not Apply if material, air or surfaces Temperature is below *0° F Surfaces and ambient temperatures must be between *8° F and **0° F 5° above dew point and remain above *8° F a minimum of four hours after application. Test all products for compatibility prior to application

 

THINNING & CLEAN UP

Product is supplied without the need for thinning MAXIMUM ½ pint per gallon added if thinning is required. Clean up with warm, soapy water.

 

COLORS

Available in assorted stock colors.

Custom colors and specialty products are available.

 

V O C

MAXIMUM VOC

 

SURFACE & APPLICATION

 

WOOD:Clean, dry & dulled surface optimal. Remove all loose & flaking paint. Remove loose Unstable wood fiber. Prime all new wood with appropriate primer.

 

METAL: Clean, dry & dulled surface optimal. Prime all new metal with appropriate primer.

Surfaces to be rust free, and clean from

all forms of contaminates.

 

MASONRY: Clean, dry & dulled surface optimal.

Allow ****0 days for all new masonry

to cure and to provide proper pH

before priming & painting.

 

CAUTION:

Avoid CONTACT WITH SKIN & EYE’S. NOT TO TAKE INTERNALLY. WASH THOROUGHLY AFTER USING PRODUCT. ADDITIONAL SAFETY & HANDLING INFORMATION AVAIABLE WITHIN MATERIAL SAFETY DATA SHEETS  (MSDS). KEEP THIS AND ALL PAINTS OUT OF REACH FROM CHILDREN. ALWAYS USE IN WELL VENTILATED AREAS.KEEP FROM FREEZING. IRRITATION FROM PAINT TO EYES, NOSE, SKIN COULD OCCUR. FLUSH EYES FOR *5 MIN IF EYES COME IN DIRECT CONTACT AND COUNSULT PHYSICIAN IMMEDIATELY.