Sell Smart Plas Interior Wall Paint/Coating

Description

DESCRIPTION

Acrylic emulsion based, matt final coat decorative interior paint.

 

APPLICATION

SMART PLAS is applied on properly prepared interior mineral surfaces like rough cast, concrete, cement sheet, plaster panel and old painted surfaces with suitable undercoating.

 

FEATURES

Adheres to the surface perfectly, doesn’t blister or crack.

Covers up the surface well, has high whiteness.

Highly vapor permeable, enables the vapor to be thrown out and lets the surface breathe.Highly covering.

Water-based, odor-free; harmless to human health and environment.

 

SURFACE PREPARATION

Clean all dirt, oil, blistered paint and dust off the application surface; level the surface defects with FIRACOLOR ACRYLIC PUTTY THIN. 

 

APPLICATION INSTRUCTIONS*

 

Undercoat the previously painted or to be painted surfaces with FIRACOLOR UNIFIRA.

Mix SMART PLAS well prior to application.

Prior to application, dilute SMART PLAS with *0% fresh water, and apply in 2 coats with roller, brush or spraying method.Wait a minimum of 4 hours between coats.

The environment of application must be kept above *5 Ëš C within *4 hours during and after the application.

 

DRYING TIME:The contact time is **6 hours, and thorough-dry time is *4 hours in environment of *3oC.

 

PACKING: 2,5 L – 7,5 L – *5 L

 

CONSUMPTION:Depending on surface smoothness and application methods, for single coat application:

FLASH POINT:Water-based, non-flammable

 

STORAGE:Store in enclosed packaging for 1 year between *5oC to **0oC

 

WARNINGS:Keep away from places where children can reach.Avoid eye and skin contact.