construction concrete steel rebar

Description

construction material 
 
reinforcing steel bar price  
1.Materal:*0MnSi
2.Standard: BS***9 G**0B****7
                   BS***9 G**0B****5
                   ASTM A**5 G*0/*0
                   ASTM A**6
                   DIN****1 **0S/**0S
                   DIN****1 BST**0S
                   JIS G***2 SD**0
                   GB HRB**5/HRB**0/HRB**0
3.Diameter:8mm**0mm
4.Length:6m 9m *2m
5.Aplication:construction,bridge
6.we get BV certificate
  Sizes and grades  
 
  U.S. sizes  
 

ImperialBar Size	"Soft"Metric Size	Weight per unit length(lb⁄ft)	Mass per unit length(kg/m)	Nominal Diameter(in)	Nominal Diameter(mm)	Nominal Area(in²)	Nominal Area(mm²)
#3	#*0	0.**6	0.**1	0.**5	9.**5	0.*1	*1
#4	#*3	0.**8	0.**6	0.**0	*2.7	0.*0	**9
#5	#*6	1.**3	1.**6	0.**5	*5.**5	0.*1	**0
#6	#*9	1.**2	2.*4	0.**0	*9.*5	0.*4	**4
#7	#*2	2.**4	3.**9	0.**5	*2.**5	0.*0	**7
#8	#*5	2.**0	3.**2	1.**0	*5.4	0.*9	**9
#9	#*9	3.**0	5.**1	1.**8	*8.*5	1.*0	**5
#*0	#*2	4.**3	6.**8	1.**0	*2.*6	1.*7	**9
#*1	#*6	5.**3	7.**4	1.**0	*5.*1	1.*6	***6
#*4	#*3	7.**0	*1.*1	1.**3	*3	2.*5	***2
#*8	#*7	*3.*0	*0.**4	2.**7	*7.3	4.*0	***1
#*8J		*4.*0	*1.**5	2.**7	*9.4	4.*9	***8

  Canadian sizes  
Metric bar designations represent the nominal bar diameter in millimeters, rounded to the nearest 5 mm.
 

MetricBar Size	Mass per unit length(kg/m)	Nominal Diameter(mm)	Cross-SectionalArea (mm²)
*0M	0.**5	*1.3	**0
*5M	1.**0	*6.0	**0
*0M	2.**5	*9.5	**0
*5M	3.**5	*5.2	**0
*0M	5.**5	*9.9	**0
*5M	7.**0	*5.7	***0
*5M	*1.**5	*3.7	***0
*5M	*9.**5	*6.4	***0

  European sizes  
Metric bar designations represent the nominal bar diameter in millimetres. Bars in Europe will be specified to comply with the standard EN ****0(awaiting introduction as of early ***7), although various national standards still remain in force (e.g. BS ***9 in the United Kingdom).
 

MetricBar Size	Mass per unit length(kg/m)	Nominal Diameter(mm)	Cross-SectionalArea (mm²)
6,0	0.**2	6	*8.3
8,0	0.**5	8	*0.3
*0,0	0.**7	*0	*8.5
*2,0	0.**8	*2	**3
*4,0	1.*1	*4	**4
*6,0	1.**9	*6	**1
*0,0	2.**7	*0	**4
*5,0	3.**5	*5	**1
*8,0	4.*3	*8	**6
*2,0	6.**6	*2	**4
*0,0	9.**8	*0	***7
*0,0	*5.**3	*0	***3

  Australian Sizes  
Reinforcement for use in concrete construction is subject to the requirements of Australian Standards AS********9 (Concrete Structures) and AS/NZS********1 (Steel Reinforcing for Concrete). There are other standards that also apply to testing, welding and galvanising. The designation of reinforcement is defined in AS/NZS********1 using the following formats:
  Bars  

Shape Code	Yield Strength (MPa)	Ductility Class	Nominal Diameter (mm)
D - Deformed Bar	**0 MPa	N - Normal	*0
R - Round Bar	**0 MPa	L - Low	*2
			*6
			*0
			*4
			*8
			*2
			*6
			*0

 

• Examples:
• D**0N*2 is deformed bar, **0MPa strength, normal ductility and *2mm nominal diameter - also known simply as "N*2"
• R**0N*0 is round bar, **0MPa strength, normal ductility and *0mm nominal diameter - also known simply as "R*0"

 
Bars are typically abbreviated to simply \'N\' (hot-rolled deformed bar), \'R\' (hot-rolled round bar), \'RW\' (cold-drawn ribbed wire) or \'W\' (cold-drawn round wire), as the yield strength and ductility class can be implied from the shape. For example, all commercially available wire has a yield strength of **0MPa and low ductility, round bars are **0MPa and normal ductility, etc.