SunGoldPower 6000w 24/48v UPS pure sine wave inverter with charger

Description

Features:
 

•     Pure sine wave output, available for sensitive load

•     Low Frequency Inverter

•     Inbuilt pure copper transformer

•     *-step progressive charging, 7 battery type selector

•     Fast and powerful charger with *0A and *0A

•     Accept generator’s energy output

•     High power factor

•     Automatically transfer between battery and line modes

•     Microprocessor control guarantees high reliability

•     Bypass without battery connected

•     Remote control function

•     Charge current is adjustable *5%,*0%,*5%.**0% (optional)

 
Protection against:
 

•     Over load, over temperature, over charging, low battery

•     Reverse connection(optional by hard connector)

•     blackouts


Specification

Nominal Power：***0W
Peak Power: ****0W
AC output: AC**0V/**0V or AC**0V/**0V/**0V
Phase & waveform: Single phase & sine wave
Acceptable Voltage: *****7VAC or ******3VAC(wide mode)
Line Low Transfer:  *5V+/*4%  or  **4(**4 wide mode+/*4%)
Line Low Return: *5V+/*4% or **4(**4 wide mode+/*4%)
Line high Transfer: **5V+/*4% or  **3+/*4%
Line high Return: **7V+/*4% or **3+/*4%
Frequency: *0Hz or *0Hz (auto sensing)
Line Low Transfer: *7Hz for *0Hz,*7Hz for *0Hz
Line high Transfer: *5Hz for *0Hz,*5Hz for *0Hz
Phase & waveform：Single phase & sinewave(bypass mode sync to input)
Voltage Regulation： +/**0%rms(bypass mode sync to input)
Frequency：*0Hz+/*0.3Hz(bypass mode sync to input)
Crest Power：3 times of ratings
Short Circuit Protection：Yes, shutdown after *0 minutes
Power Factor：0.**1.0
Battery Voltage：*4v / *8v
Minimum Start  Voltage: *0V / *0V
Low Battery Alarm: *1V / *2V
Low Battery Transfer: *0V / *0V
High Voltage Alarm: *2V / *4V
Max Charging  Current: *5A OR *5A
Over Charge Voltage: *1.4V / *2.8V
Transfer Efficiency:  line Mode＞*5%    Battery Mode ＞*8%
power saver: Available when the load is less than *5 Watts
Indicators:
*-LED Display
From the right to the left,LED1 line mode (green lighting)、LED2 inverter mode
(green lighting)、LED3 charging mode(yellow lighting)、LED4 Fully charged 
(green lighting)、LED5 over heat shutdown(red lighting)、LED6 Overloaded
shutdown(red lighting)、LED7 Saving Mode(green lighting)
 *-LED Display
Charging Mode(green lighting)、inverter mode(green lighting)、Alarm(red lighting)
Switch selector:
Saving Mode is on/off when push the switch forwards/backwards,   keeping it horisontal is turning the inverter off.
Audible Alarm:
Sounding when the heatsink\'s tem is over **5℃ and shutdown after *0 seconds.
Protections:
low battery、over charging、over temp、over load
Operating  Environment: ***0℃,***0%RH(non-condensing)
Audible Noise: ＜*0dB
Size: **8mm***8mm***9mm
Net Weight (KG): *8kg