Description

Name: GSM Dialer & AC Power Monitoring Alarm

Model: RTU***2 

The GSM Dialer is a simply GSM Dialer with 1 digital input, it is special for monitoring AC power status, connect IP Camera or CCTV or detector, and convert traditional PSTN alarm to GSM Network. It can dial or send SMS alert message to upto 6 authorized users.

The user can receive SMS Text and calling from the GSM Dialer once the alarm occurrence immediately. Also, remotely switch the GSM Dialer to arm or disarm with free call from mobile phone, or remotely call in the GSM Dialer to listen in on-site, or send SMS Command to request the GSM Dialer call back.

The GSM Dialer equips 1 wired inputs for IP Camera Alarm Output, other alarm panel output to transfer alarm message by SMS over GSM Network.

The GSM Dialer inbuilt power detection circuit, no need any other detector or sensor to monitoring the external power directly. Once external power goes off or goes on, the GSM Dialer can send SMS or dial upto 6 authorized mobile phones.




Functions & Features of the GSM Dialer:

?  GSM Frequency: **0/***0Mhz or **0/***0Mhz;

?  Supports Away Armed, Partial Armed(At House or Stay),Spot or Disarmed by SMS Commands, Call in with free charge;

?  Supports Android Apps and iOS apps, quickly to Arm, Disarm, Inquiry Status, Switch ON or OFF Siren, Call in to arm/disarmed , Call in to listen in;

?  Supports 6 User Numbers, each number can be setup as receive SMS or receive call or both of them, also, each number can be setup authorized to call in to listen or call in to arm or stay the system;

?  Supports listen on-site through internal sensitive microphone and call back;

?  Automatically send SMS Alert Alarm Message and dial to the pre-set numbers when alarm occurrence;

?  Supports 1 wired zones(Dry Contact Type), the input can be Normal Close(NC), Normal Open(NO), special for IP Camera and CCTV System or other wired sensor connection;

?  Supports verity programmable zone attributes, includes Away(normal), At House or Stay, Entrance Zone, *4 Hours Sound Zone, *4 Hours Silent Zone, Local Zone(Spot), SOS Zone, Door Bell Zone;

?  The Zone Name of DIN is programmable by user through SMS Commands;

?  Supports Armed delay to give enough time to leave the home, the delay time is programmable by user;

?  Supports Alarm Delay to give enough time to Disarm it when you come back home, the delay time is programmable by user;

?  Equips one siren output for sounding while alarm occurrence to warn;

?  Supports to setup how long to send SMS message to users after the external AC power goes off/on;

?  Standby internal large capacity rechargeable battery which can standby upto 8 hours after AC Power failure, also can provide power to wired siren after AC power failure;

?  Supports Password to increase the security of the whole system;

 

Specifications of Mainframe of the SafeBox:

Rated Voltage:  *2VDC2A

Standby current: ****5mA(Not charging Battery)

Siren Output Voltage: 9VDC

Working temperature:  **0～**0

Storage temperature:  **0～**0

Relative humidity:     ****0%, No condensation

GSM frequency:      **0/***0Mhz(Default) or **0/***0MHz(Optional)

Communication protocol:   GSM PHASE 2/2+ (include data service)

Wired Zones: 1, Dry Contact, NC, NO.

Backup Battery: **0mAH Rechargeable lithium battery

         Standby time Approx. 8 hours (depending on the network condition)

Dimensions: **0mmX*2.6mmX*0mm (WXDXH);  

Net Weight: approx. 0.*0Kg


Skype:gsmrtusystem