Blood Collection tube Additives

Description

 Product Manual  
[Product Name]Lithium Heparin
 
[Package Size]plastic bottle,*0g/ bottle
 
[Product Standards]Q / WHDS ********3

[Traits] White amorphous powder, odorless, soluble in water, easy absorption of moisture, the average molecular weight is ****0, and stability at room temperature. The company lithium heparin potency ≥ **0IU/mg, ≥ **0IU/mg anhydrous titer. Other indicators of sodium heparin API reference standard to control.
 
[Application] This product is mainly used for extracorporeal blood anti-coagulant, additive for anti-coagulation clinic blood test,Pretreatment of blood specimens in clinical blood collection and testing process (anti-coagulant treatment).
 
[Scope] This product is suitable for collection and anticoagulant in clinical biochemistry and biochemistry examination of blood samples, blood samples were collected and anti-coagulation is also applicable to the blood rheology project.
In the determination of ion content in the blood of clinical laboratory, recommend the use of lithium heparin as an anticoagulant, because it\'s not easy for other ions generated by interference.
1.This product is not a drug, not as injection, to prohibit the direct injection in human and animal.
 
[Usage] Using this product with deionized water (distilled water) dissolved,To prepare a solution of certain concentration and content, and then joined the mining vessel.

1. Solution preparation methods and procedures:
1.1. Preparation: electronic balance (1/****0), volumetric flask (**0ml, **0ml, **0ml, ***0ml, on the basis of the need to use), beaker, deionized water (distilled water), glass rod, the washing bottle etc..
 
1.2. Weighing: determine beforehand with the electronic balance weighing heparin lithium powder several, accurate to 1/****0, and then carefully heparin lithium powder into the volumetric flask or beaker, wash bottle carefully attached heparin lithium powder in a volumetric flask or beaker and wall into the bottle or cup;Pay special attention to the volumetric flask and the beaker to clean, can not have impurities, dirt, bacteria and oxide. The cleaning bottle and jar please refer to "relevant content." in the operation manual.
 
1.3. This product can be dissolved in deionized water(distilled water). Deionized water solution can add a certain amount of first in the beaker, adding water and stirring with a glass rod slowly, after it is dissolved completely into the volumetric flask. Can also be directly used in volumetric flask dissolved. Special attention should be paid to the beaker dissolve in water control during dissolution, to give back, cleaning glass beaker and other appliances attached on the heparin with enough volume,Otherwise it will cause the super capacity leads to decrease in the concentration of heparin.

1.4. Volume: the lithium heparin completely dissolving, eyes and volumetric flask scale line to maintain the level of state, with the bottle slowly along the bottle wall volume deionized water is added, the concave surface and the bottom of the scale lines

1.5. Mixing: sealing capacity bottleneck capacity bottle stopper, one hand holds the bottle upper and fingers suppress plug, one hand holds the bottle bottom upside down, careful blending **8.
 
1.6. Check and Confirmation: carefully check the key factors of heparin lithium weighing and volumetric flask volume, recalculate the lithium heparin effective content, by the competent confirmation can be.

2. Add method:
2.1. Machine added:
2.1.1. Cleaning: the machine carefully before use the cleaning container on the machine and pipeline clean, can be rinsed with deionized water, then with *0% concentration alcohol to clean the container and pipe 3 times, and then use the above *9% ethanol cleaning vessels and piping with hot air dryer, alcohol can be. Ensure the adhesion of the container and pipe wall has no impurities, bacteria and water, avoid pollution to the heparin lithium.

2.1.2. On the basis of machine adjustment will be the production of blood volume determination requires the addition of heparin lithium quantity or volume number, adjust the machine flow regulator to proper value, add *****0 tubes,Check whether it meets the requirements of accession and dose. Allowable error solution added is ± *0%.


[Instructions or ICON]Please read this product manual before using the product . Unclear issues please contact the company.
 
[Product Care and Maintenance Methods]Does not apply.
 

 
[Storage Condition]Product can be sealed and stored in a cool dry place, avoid light, not damp. The product of the aqueous solution in aseptic conditions **4 ℃ sealed, the longest duration of not more than 7 days. Recommend this product solution prepared in solution state, not long time storage.
 
[Validity]3 years
 
[Other matters of common unit conversion]
1. Weight unit: 1g mg = ***0; 1kg = ***0 g;
2. Volume unit: 1ml = ***0 UL, 1L = ***0 ml;
3. Potency unit: 1IU = 1.**4 USP.