Supply Haemodialysis machine

Description

Intelligent operation system; Easy operation with visual and audio alarms; Multi-purpose service/maintenance interface; Profiling: sodium concentration and UF curve;
 
Main performance of this device:
 
1.Self-checking function;
2.Carbonate dialysis;
3.Double needle dialysis;
4.Liquid level detector;
5.Bubble detector;
6.Blood leakage detector;
7.Temperature and electric conductivity monitoring;
8.Arterial pressure, venous pressure and transmembrane pressure monitoring;
9.Rolling blood pump;
*0.Heparin pump;
*1.Dehydration amount controlled by capacity;
*2.Automatic disinfection cleaning program;
*3.Stand-by power of blood pump in case of power failure;
*4.Information display function of display screen.
 
*This device is designed and manufactured in strict accordance with the
requirements of national laws and regulations. The reference standards of design and manufacture are following: GB***6.*****7; GB***6.*****3; and YY********3.
 
Technical Parameter
Size &Weight:
Size: **0mmx**0x***0mm (L*W*H);
Area: **0***0mm;
Weight: *8KG;
 
Power supply:
AC**0V, *0Hz/*0Hz, *0A
Input power: ***0W
Back-up battery: *0 minutes
 
Working Condition:
Water input pressure: 0.1Mpa~0.6Mpa, *5P.S.I~*0P.S.I
Water input temperature: 5℃~*0℃
Working environment temperature: *0℃~*0℃ at relative humidity ≦*0%
 
 
UF rate:
Flow range: 0ml/h~***0ml/h
Resolution ratio: 1ml
Precision: ±*0ml/h
 
Blood pump &Spare pump:
Blood pump flow range: *0ml/min~**0ml/min(diameter:6mm)
Spare pump flow range: *0ml/min~**0ml/min(diameter 8mm)
Resolution ratio: 0.1ml
Precision: ±*0ml or *0% of reading
 
Heparin pump:
Syringe size: *0, *0, *0ml
Flow range: 0ml/h~*0ml/h
Resolution ratio: 0.1ml
Precision: ±5%
 
Monitoring system &Alarm setup:
Venous pressure: ***0mmHg ~ ***0mmHg,  ±*0mmHg
Arterial pressure: ***0mmHg ~ ***0mmHg,  ±*0mmHg
TMP   pressure: ***0mmHg ~ ***0mmHg,  ±*0mmHg
Dialysate temperature: preset range *4.0℃~*9.0℃
Blood leak detection: Photochromic alarm when erythrocyte specific volume is 0.*2±0.*2 or blood leak volume is equal or more than 1ml per liter of dialysate.
Bubble detection: Ultrasonic, Alarm when a single air bubble volume is more than **0μl at **0ml/min blood flow
Conductivity: Acoustic-optic
 
 
Disinfection/Sanitize:
1.Heat disinfection:
Time:*0 minutes; Temperature: about *0℃, at flow rate **0ml/min;
2. Chemical disinfection:
Time: *0minutes, Temperature: about *6℃~*0℃, at flow rate **0ml/min;
3. Chemical disinfection with heat:
Time: *5minutes, Temperature: about *6℃~*0℃, at flow rate *0ml/min;
4. Rinse:
Time:*0minutes, Temperature: about *7℃, at flow rate **0ml/min;
 
Storage Environment:
Storage temperature should be between 5℃~*0℃, at relative humidity ≦*0%