FOB Price
أحصل على آخر سعر1000 ~ 2000 / Ton ( Negotiable )
|Minimum Order
Place of Origin:
-
Price for Minimum Order:
Minimum Order Quantity:
25 Ton
Packaging Detail:
25kg/Bags or According to Customer Demand
Delivery Time:
within 20 working days after confirm payment
Supplying Ability:
76000 Ton per Year
Payment Type:
T/T, L/C
الشخص الذي يمكن الاتصال به Mr. Oliver
Plastic Packaging Base, Xiongxian, Baoding City, Hebei
Polypropylene staple fiber
Melting Point: ******0
Fiber Length: ***8mm
Elastic Modulus: ***0MPa
PP fiber
PP fiber is mainly used in cement paint and plaster
With the rapid development of domestic economy and urban
construction and enlarged scale of industrial and civil
construction, the requirement to the technical disposal of building
surfaces is much higher than before. On the basis of improving
body\'s engineering design and constructing quality. Improving the
surface quality, like roof of building and wall and floor, becomes
a crucial task to the construction field. So on the basis of
successfully developing polypropylene fiber-mesh for concrete and
polyester fiber for bitumen for bitumen and in view of some
technical problems existing in constructing field, our company sums
up experiences and develops cracking-resistance reinforced fiber
for cement paint (using in plastering). This fiber can improve
quality of building\'s wall and floor, and supply a new technical
measure to reduce the surface crack, so it has a good economic
results.
[Reinforced Functions to Concrete Mortar]
1. Resist to shrink & crack;
2. Increase impact resistance and peeling resistance;
3. Increase friction resistance;
4. Increase seepage resistance;
5. Increase freezing & thawing resistance;
6. Improve tendons protection
7. Prevent mortar split and crackle expansion;
8. Replace steel net (using in plastering).
[The Feature of Polypropylene Monofilament]
1. No agglomeration and easily spread around in mortar or concrete.
Guarantee the property of crack resistance effectively;
2. Apply conveniently. No need to change the proportion of mortar,
and just put the fibers into the mortar mixture and stir for a
moment after adding water;
3. Has fine economic property. The equivalent dia. Of polypropylene
monofilament is only 0.*2mm, so the ratio of dia. And surface is
high and on the basis of crack resistance, it can reduce the amount
(o. 6kg/m3 ) and cut down the cost effectively;
4. Be better to plaster. Because a great number of thin fibers
spread into mortar evenly, so the plastering is much easier and
this can improve the binding strength between surface and
base;
5. The fiber has stable chemical property, strong acid &alkali
resistance, and can be used in any engineering projects.
[Suitable Engineering for Polypropylene Monofilament]
1. Be suitable for the waterproof layer, floor, inner &outer
wall of industrial and civil construction;
2. Increase cracking resistance on the surface of industrial
workshop, warehouse and parking lot;
3. Increase cracking & seepage resistance of the ground in
natatorium, swimming pool, pond and ditch;
4. Be suitable for any mortar projects and fine aggregate concrete
projects.
[Application Instruction]
1. Compound Amount. To resist the common cracks on surfaces,
0.6kg/m3 fibers to cement paint are enough, and for reinforced
application 0.*-. 8kg/m3 are enough.
2. Stirring requirement. The proportion of cement, sand and
aggregate is no need to be changed. Put cement, aggregate, additive
and fiber together, then stir after adding enough water (Do not
stir without water! ) and time for stirring can be prolonged for
2~3 minutes in order to make the compound mix completely.
3. Package. There are two specifications: 0.6kg per bag and 0.9kg
per bag.
Raw Material | Polypropylene | Crack Elongation | ****0% |
Fiber Type | monofilament | Density | 0.*1g/cm 2 |
Fiber Dia. | 0.*2+/*0.**5mm | Melting Point | ******0C |
Tensile Strength | 7.*7cN/dtex | Acid & Alkali Resistance | Strong |
Item | Products Indicators | Technical Parameters |
I. | Material | virgin polypropylene |
II. | Length | 3mm to **0mm |
III. | Density | 0.9g/cm³*0.*2 g/cm³ |
IV. | Diameter | *0 micron to *0micron |
V. | Elongation At Break | ***0% |
VI. | Tensile Strength | >**0Mpa |
VII. | Melting Point | ******0 °C |
VIII. | Ignition Point | ******0°c |
IX. | Oil Point | lower than 1% |
X. | Water-hygroscopicity | No |