Description

The  Multi Pulse Intelligent Cable Fault Locator can detect and locate all cable faults such as high & low resistance, short circuit, open circuit, circuit break, high resistance leakage and high resistance flashover faults.It is usde for all types of cables such as electric power cable, high-frequency coaxial cable, telecomm cables and other more than two wires and cables uniformly buried underground.

Testing Method: Multi Pulse, High-voltage Current Impulse Sampling Method, Low-voltage Pulse

Impact high Voltage： Less than *5KV

Data Sampling Rate: **0MHz, *0MHz, *0MHz, *0MHz

Distance test: ＞*5Km

Readout Resolution: ＜0.5m

Testing Accuracy: less than *0cm

Test Pulse Amplitude: about **0VP-P



Waveforms:

1. Waveforms are simple and easy to read. Waveforms for all high impedance faults are displayed only in one type, as simple as that of low pressure pulse short-circuit fault.

2. Waveforms tested by different testing methods can display together or be superposed on the same screen to compare with each other.

3. Can store large quantity of waveforms tested on site in specified sequence.



Touch Screen:

1. Touch Screen display and English menu.

2. Screen contents can be copied and waveforms can be printed out.

3. Has USB and web interfaces for data copy and transfer.



Safe Protection:

It has very safe sampling high pressure protection measures, and testing instruments will not crash or be damaged.



Rechargeable battery: 6 hours of working time after one time full charge, charged by AC power source.



Working Condition: Temperature range of **0℃～**5℃, relative humidity of *0%, atmospheric pressure of **0±*0mmHg.