Description
Products:
Manual LXC***0 generators parallel
controller for more than one of the same capacity or a different
capacity generators / automatic parallel system as well as for
single generator set constant power output and electricity grid,
automatic power-generating units shut down / parallel operation,
data measurement, alarm protection and "three remote" feature. The
controller uses a large-screen LCD graphic display, can display
Chinese, English and other languages​​, simple, reliable
operation. GOV and AVR with a control function, can automatically
synchronize all kinds of working conditions and load sharing, the
controller accurately monitor turbines, generators work when
abnormal fault status display automatically while troubleshooting
column from the parent, close generators, in LCD. All parameters
can be used to adjust the PC via the USB interface, but also the
use of a PC via RS**5 interface adjustment and monitoring. Its
compact structure, simple wiring, high reliability, and can be
widely used in various types of generators automated parallel
system.
Product performance and features:
1, using **0 * **8LCD display with
backlight, Chinese, English and other languages ​​optional
interface operation, and can be on-site selection, easy to plant
commissioning test machine;
2, with CAN BUS interface, you can
connect with J***9 EFI machine can not only monitor the common data
EFI machines (such as water temperature, oil pressure, speed, fuel
consumption, etc.), you can also CANBUS interface control starting,
stopping, acceleration and deceleration, etc;
3, suitable for three-phase four-wire,
three-phase three-wire, single-phase two-wire, two-phase three-wire
(**0 / **0V) power supply *0 / *0Hz system;
4, acquisition and display busbar /
generator phase voltage, phase current, frequency, power
parameters;
5, busbar has a phase, reverse phase
sequence detection, power generation has overvoltage, undervoltage,
over frequency, under frequency, over current, over power, reverse
power, phase, reverse phase sequence detection function;
6, the synchronization parameters are:
power generation and busbar voltage difference, frequency
difference generation and busbars, busbar power and phase angle
difference;
7, in the automatic mode with multiple
operating modes: with no load operation, load operation, according
to the needs of parallel operation;
8, with a parallel / load transfer
function of soft splitting;
9, three fixed analog sensors
(temperature, oil pressure, level), two programmable analog sensor
can be set to the temperature or pressure or liquid level
sensor;
*0, a variety of temperature, pressure,
oil level sensor curves can be used directly, and custom sensor
curve;
*1, control and protection functions:
automatic diesel generator set start / stop, switching sub-gate and
perfect display fault protection and other functions;
*2, the parameter settings: allows users to
change the setting of its parameters, and memory in the internal
EEPROM memory when the system is powered down is not lost. Most
parameters can be adjusted from the front control panel, all
parameters can be used to adjust the PC via the USB interface, but
also the use of a PC via RS**5 interface adjustments. Using MODBUS
protocol can achieve "three remote" function;
*3, with **0 history, real time clock, timer
switch (monthly / weekly / boot once a day and can be set with or
without load) function;
*4, with a total running A, B and cumulative
energy A, B, users can clear the re-accumulation, user-friendly
self-statistics;
*5, a heater, a cooler, fuel pump control
functions;
*6, with a maintenance function, the
maintenance time to the action can be set (warning, alarm stop or
trip down);
*7, modular design, flame-retardant ABS
housing, pluggable terminal blocks, embedded installation, compact,
easy to install.
Specifications:
Display: LCD (**0 × **8)
Operation Panel: silicone panel
overlay
Digital inputs: 8
Relay Output: 8
Analog inputs: 5
AC format: 1P2W / 2P3W / 3P3W /
3P4W
Generated voltage detection range: (*5 ~
**0V) V (ph-N)
Power generation, electricity frequency
range: *0 / *0Hz
Monitoring Interface: USB / RS**2 /
RS**5
Programming Interface: USB / RS**2 /
RS**5
Controller Power: (8 ~ *5) VDC
Dimensions: **4 × **0 × *4
Hole size: **8 × **0
Operating temperature: (- *5 ~ + *0) ℃
