Robot arm 5 axis for stamping press

Description

With four degree of freedom, left and right rotation, up and down, back and forth, end rotation, there is no requirement of the center of the mold height, spacing. Non-standard customization is available to meet different load and arm stretching, according to customer requirements.

1. All servos are absolute position servos. Mechanical origin is no need to be relocated after power off and restart, and the origin can be quickly repositioned according to the servo memory. There is no origin sensor switch to reduce the failure rate.

2. The main axis of rotation uses robot-specific high-precision hollow reduction gear, with features of compact, beautiful, strong steel, torque and impact resistance.

3. firstThe levelotation and flip up and downuse robot coupling drive mechanismhe two driv motorrear and relatively static, thus greatly improving the stability of the device and the load capacityEquipped with mixed connection unit,can beentire line split into several small to operate.Because of the mixed connection unit, the can move freely, and man-machine mixed operationwhich is convenient for arranging personnel to work inunsuitable

7Equipped with intelligent programming system, learnvery time mold,five minutes.

8 lectric box and the host integrated designmore convenient for installationtamping robotuser-friendly than any brand of general-purpose six-axis robotprecision, life,user-friendly