CE Certified CK5116 Single Column Vertical Lathe

Description

vertical lathe machines
Main structure:   cutting machine cnc

 

Stand column:  

The stand columns are divided into two main and auxiliary rails at left and right. The machine lathe can be more stable at run time, more rigid when strong cutting because the span between the main and the auxiliary guide rail becomes large and *5 degrees forked tail on one side of the main rail can be oriented.

Main drive system:

The main transmission gets power from *0KW three-phase asynchronous machine or continuous current dynamo. From belt to gear box, through two grades infinitely variable speeds, then the spiral bevel gear changes *0 degrees, the skewed tooth put the gear ring and the worktable into rotation. The wheel gear in the gear box quenching, grinding, gets high transmission accuracy and transmission efficiency, and reduces transmission vibration and noise.

Part of worktable:

The parts of worktable is constituted by the workbench, the main spindle and the workbench base.The worktable rotation and load-bearing consist of hydrostatic slideway and two sets of 3,**2,**0 series bearings. The workbench embeds with zinc, aluminum and copper alloy guide rail board. Artificial scraping carefully can ensure the verticality with the main spindle, thus reducing the nonuniformity of shearing the oil film when rotating, ensuring the long-term stability of the lathe rotation accuracy.

Beam:

The ball screw, planetary reducer, servo motor in the crossbar constitute the left and right feeding system. The movement of the beam in the column is oriented by *5 degrees guide rail and platen.

Vertical Turret:

Vertical turret is composited with the rotary slide, ram, ball screw, planetary gear and servo motor. All sliding contact surfaces of the vertical turret are embedded with PTFE guide rail soft belt. In the case of full lubrication, it can significantly reduce the friction, reduce vibration, avoid the creeping phenomenon generated in the process of feeding.

Operation:

The machine lathe has a separate console. The console has the operation buttons of the full machine. The operators can focus on operating the machine at the button station.

Hydraulic pressure and lubricating:

The machine hydraulic pressure system is divided into two pressure degrees. High pressure is used for workbench floating. The overflow of oil of low pressure is for gearbox lubrication, helical gear lubrication and so on.