Description

The FSM**0S is core-to-core alignment single fiber splicer succeeding to FSM**0S. In addition to ruggedized concept, which *0S created, the *0S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for

quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor. Market is from backbone network installation to opto-electronics components production for quality splice.

 

Specifications:

• Applicable fibres : SM (ITU-T G.**2 & G.**7), MM (ITU-T G.**1),DS (ITU-T G.**3), NZDS (ITU-T G.**5),Others
• Fibre Count : Single
• Cladding diameter : *0 to **0µm
• Coating diameter : **0 to ***0µm
• Fibre cleaved length : 5 to *6mm using Sheath Clamp A, B or 5 to*3mm using FH******0, FH******0
• Actual average splice loss : 0.*2dB with SM, 0.*1dB with MM, 0.*4dB with DS, 0.*4dB with NZDS.
• Splice time : 7sec:SM FAST mode, *2sec :SM AUTO mode, *5sec:AUTO mode
• Return loss : *0dB or greater
• Splicing modes : **0 splicer modes are available
• Splice loss estimate : Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate.
• Attenuation splice function : Intentional high splice loss of 0.1dB to *5dB (0.*1dB step) can be made for an
• inline fixed attenuator
• Storage of splice result : The last ***0 results to be stored in the internal memory.
• Magnification : X / Y (**0X magnification), or both X and Y simultaneously (**0X magnification)
• Viewing method : By two CMOS cameras for intersecting fiber viewing and 4.*3 inches TFT colour LCD monitor
• Tension test : 1.*6 to 2.*5N
• Operating condition : *****0m above sea level, ***5% RH and **0 to *0°C respectively.
• Tube heater : Built-in auto-start tube heater with *0 heating modes and up to *0 for reference
• Tube heat time : ****5sec. with FP**3 protection sleeve. Total memory of *0 heating modes are available
• Applicable protection sleeve length : *0mm, *0mm and a series of micro sleeves.
• No. of splice/heating with battery : **0 times of splicing and heat shrinking under with BTR**9
• Power supply : Auto voltage selection from **0 to **0Va.c. or *0 to *5Vd.c. with ADC**8. *4.8Vd.c. with BTR**9
• Terminals : USB2.0 ( Mini-B) for data and video signal transfer to PC.
• Wind protection : Up to *5m/s wind velocity
• Dimensions : **6(W) x **9(D) x **0(H) mm. Including wind protector, monitor, and rubber protector. Excluding rubber foot
• Weight : 2.5 kg, with ADC**8 AC adaptor, 2.7 kg, with BTR**9 battery
• Electrode life : ***0 arc-discharges