High Pressure Grinding Roll

Description

  High pressure grinding roll has simple structure and reliable performance. Its high pressure can grind material to fine, superfine products with the fineness modulus under control. Our company specially considered the needs for shattering rigid material in design, so the grinding machine has higher crushing capacity compared with other high pressure roller grinding machines. It is applicable to crushing material with medium and high hardness and pressure strength of lower than 250Mpa and humidity of lower than 10%, such as cobbles, coke, coal, ceramics, quartz, limestone, muddy shale, chalkstone, gypsum, edible salt and chemical material. This machine is characterized by low maintenance cost, large crushing ratio, reliable performance, small vibration, and less dust and low noise.      High pressure grinding roll can be used to moderately crush single-component material with high or medium density, like ore, rock and industrial slag in a wide variety of fields, such as ore dressing, electricity, chemical industry, cement, fire retardant material, grinding material and construction. In particular, it can be used to produce melon stone, coal and coal gangue in building material and electricity industry with better results than normal high pressure roller grinder. It can also be used for crushing steel grit.
Working principle
      The roller crushing machine has two rollers rotating in the opposite position. Brittle material is sent to a weighing hopper with weighting sensor by a transference mechanism and passes through the feeding mechanism until it enters into a place between two rollers of the same sizes standing in the opposite position. The side of the roller draws the material into the roller crevice with high pressure in between, which compresses the material into compact cake-like product that drops down. The product is then moved out at the hopper by the transference mechanism, and will be separated or ground in the following process.

Product Characteristics:

1. The hydraulic system makes it easy to adjust the roller crevice while protecting the machine.

2. The roller and its surface are fitted with hard alloy studs that increase its service life by 2000-20000 hours.

 

Technical Parameters: