Triple Insulated wire

Triple Insulated Winding Wire (UL Approved)  is made up of three insulation layers use the soldering heat-resistant polyester resin and polyamide resins which were developed by New Leaf.

Meets the safety standard certification: UL,TUV Rheinland.SGS test.

 

Certification: UL E*****5

Certification: VDE********3

Environmental Protection: RoHS

 

1.Production specification range: 0.*4 ~ 1.*0mm

 

2.Temperature class XYW-E (E Class **0 °C), XYW-B (B Class **0 °C);

 

3.Excellent withstand voltage characteristics, breakdown voltage is more than *5KV, access to

    reinforced insulation (test voltage = ***0Vms, 1min) identification;

 

4.No need to peel the outer layer that can be soldered directly, Insulating layer developed by the our company\'s adoption the international leader in nanotechnology, with a direct modification of

 solderability heat-resistant which is polyester resin and polyamide resin composition, Therefore, direct soldered does not occur such as the kind of fluorine resin insulating layer exposed copper

 jacket shrinkage phenomenon, excellent solderability, solder temperature **0 ° C ≤ 3S;

 

5.Special wear resistance and surface smoothness, static friction coefficient≤ 0.**3;

 

6.Good performance on resistant to chemical solvents and impregnating varnish Rating Voltage

   Rated Voltage (Working Voltage) ***0Vrms, UL

 

7.In order to distinguish several groups different winding wire coils, our company can provide more colors triple insulated winding wire by needs of customers. The standard wire color is khaki, we have several colors as follows: red, green, blue, brown colors. There is no difference among the colors for using.For example,  GPX-B is used for a**-wat class transformer and the conventional type. Because of saving the insulators and inner baffles, the transformer could be reduced by approximately half the volume and two-thirds of the weight. This could lead to both material and fabrication cost cuts. Significantly reduced leakage inductance and distributed capacitance and improving the high-frequency characteristics of the transformer.