Characteristic of our EDM wire

1. All types of EDM wires

The diameters are from 0.*0mm to 0.*0mm etc. Weights of one spool from *5KG, *0KG, 5KG, 3KG.

2. High tensile strength

We manufacture our EDM wire from powder to wire with fine raw materials of the brass alloy under the circumstance of advanced equipments and continuous process that guarantees the stable of the chemical composition and fine tensile strength of our EDM wire. If the tensile strength is lower, the wires are easy to be broken when the current power is increased. The wires are not easy to be broken during the operation. If the wires are broken, it will waste more time repairing the machine.

3. Good precision performance:

We have advanced inspection instruments and automatic drawing machines, which could control the precision of our EDM wire. The tensile strength could be up to ***0N/ mm2, the tolerance could be within ± 0.**1mm. Our wires could be widely used in all kinds of slow speed EDM machines in many countries. The surface and tolerance are good enough to have the performance of high operating efficiency.

4. There is no brass powder on the surface of our brass wire that could prolong the life of the tools and develop the efficiency of the operating.

5. The wires are not easy to be twisted during the operation. If the wires are twisted, it will result the broken of the wires and the bad surface of the machine tools.

6. The uprightness is above *8%. If the wires are easy to be curved, it is difficult to insert the wires.





Characteristic of our Molybdenum wire

1. Meeting the standard of GB******4. At the same environment and status, the using time could be improved to **0% or **0%.

2. Extend rate less 3%. The molybdenum wire could keep their good status.

3. The molybdenum wires are same size and lubricity on the face.

4. There are all kinds of molybdenum wire in our factory and they are good quality.

5. The molybdenum wires are packed at vacuum environment and could be kept more than 1 year