Description

General information: 
SXJS-III is a new generation, fully automatic measure dielectric loss(tgδ)and the capacitance (Cx) of electric equipment. It\'s suitable for testing on transformer, insulating bush, capacitor, CT/PT, MOA and etc.

Features:
√  Frequency conversion anti interference, measuring accurately even under **0% interference, test data is stable and suitable for onsite interference dielectric loss measurement.
√  High precision, adopts digital waveform analysis and bridge self calibration technology.
√  The input resistance of whole measurement range is lower than 2Ω, to eliminate auxiliary capacitance influence of measured cable.
√  1.2.3 multi-level safety protection.
√  HV protection: Fast cut down when test object under short circuit, break down or HV current fluctuation.
√  LV protection: Auto starts protection to avoid over voltage when miss connected **0V, power fluctuation or power failure.
√  Grounding protection: When the tester is not to the ground or poor ground, the procedure will not going on, no HV output. Over current protection, to protect device against damage when test object is at short circuit or breakdown.
√  CVT: HV voltage/current, LV voltage/current 4 protection limited value, to protect the equipment. The exciting voltage will not be outputted if miss operating. No *0kV HV output under CVT measuring.
√  Anti miss operation: two degrees power switch. Voltage and current are real-time monitoring. Repeating press button to confirm. Connection terminals are divided as HV and Lv. Voltage boosting smoothly, and decreasing fast. With sound light alarm.
√  Anti "Capacity lifting": When to test large capacity test object, the voltage will be enlarged. The tester can trace the output voltage automatically, to ensure the constant of test voltage.
√  Robust and anti-shake during long transportation.
√  HV cable: Insulated hipot cable.
√  Multi working modes can realize all kinds of dielectric loss testing: Positive/ Negative connection, internal/external standard capacitance, internal/external HV. No need to connect any outside auxiliary equipment.
√  Large LCD screen with backlight, English menu easy to operate. Auto identifies the types (capacitance, inductance or resistance type) of test object.
√  Build-in printer.
√  Standard capacitor port, equipped with oil cup and special test leads, SXJS-III can realize the insulated oil dielectric loss measurement. The insulated material dielectric loss measurement also can be realized if outside connected with measuring polarity. To realize HV dielectric loss testing if outside connected with standard capacitor.
√  Auto identify *0Hz/*0Hz system power source, and support electric generator. Normal measuring even the frequency has high fluctuation.
√  Build-in series and paralleled connections two dielectric measuring modes.
√  **5 groups data storage.
√  CVT test function, can realize CVT self-excitation test. Only one test, the capacitance and dielectric loss of C1, C2 can be measured all.
√   Negative connection LV shield function: when **0kV CVT bus bar to the ground, C*1 can do the *0kV negative connected dielectric measurement without remove the wires.
√   Auto identify outside connected HV test power source frequency *0Hz~*0Hz, support power frequency source, variable frequency source and series resonant power source to proceed large capacity HV dielectric loss test.
√   RS**2 PC port, to realize measuring, data processing and test report exporting, including software updating. And can be compacted into HV test vehicle.