Description

Titanium check valve
Design standard:ASME/ANSI/API/ISO/EN/DIN/JIS/GB/HG/JB and customization 
Product main certificates:ISO********8,CE-PED,TSG,API 6D and API **7
Check valve
Design standard:BS***8 API **3
Size:1/2\'\'~*4\'\'
Pressure range:**0LB~***0LB

valve material instruction

Titanium is highly resistant to chloride-containing media, practically all salt solutions, seawater, a range of acids, organic and inorganic chemicals and gases. The high environmental resistance is primarily based on a very thin, tenacious and highly protective surface oxide film. The oxide film provides high resistance to erosion in high velocity process streams.
 titanium has only half the weight of steel. It is non-magnetic and characterized by a high melting point, high strength-to-weight ratio and a low modulus of elasticity.



3.ASTM B**7 - Titanium Grades C*2, C*3 & C*5

Titanium (ASTM B**7) is very light and very strong. Whilst it is an expensive material weight for weight with many other materials, its high strength can be utilized to good effect in designs, by reducing wall thickness and subsequently weight and cost. The poor wear and galling properties of Titanium must be considered in any design. Casting and welding processes are required to be conducted by specialists.

It has exceptional corrosion resistance to many corrosive media including hydrochloric acid and wet chlorine.

WARNING! Do not use on Hydrofluoric acid and Methanol as excessive corrosion and cracking will occur.

Titanium Chemical Composition

While Titanium is an element (No*2) and is commercially pure, as a cast product it is often alloyed with small quantities of Paladium, Aluminium & Vanadium.

Common grades in regular use:

Grade C*2—UNS R****0. Unalloyed titanium,

Grade C*3—UNS R****0. Unalloyed titanium,

Grade C*5—UNS R****0. Titanium alloy (6 % aluminium, 4 % vanadium),

Grade C*7—UNS R****0. Unalloyed titanium plus 0.*2 to 0.*5 % palladium,

Grade C*8—UNS R****0. Unalloyed titanium plus 0.*2 to 0.*5 % palladium,

Grade C*9—UNS R****0. Titanium alloy (3 % aluminium, 2.5 % vanadium),

Grade C**2—UNS R****0. Titanium alloy (0.3 % molybdenum, 0.8 % nickel),

Grade C**6—UNS R****2. Unalloyed titanium plus 0.*4 to 0.*8 % palladium,

Grade C**7—UNS R****2. Unalloyed titanium plus 0.*4 to 0.*8 % palladium,

Grade C**8—UNS R****0. Titanium alloy (4 % aluminium, 2.5 % vanadium, 1.5 % iron).