Cam intermittent divider

Description

Cam division series category:

DS- Spindle type                    DF- flange            DT- Platform-type     P- Flat type

Y- Cylinder type

**- An input shaft, an output shaft  between  the distance between the axes(mm),

This parameter determines the size of the partition specification models.

**- Of divisions:

Process driven shaft rotation stop of the number of times a week.DS/DF/DT series of divisionscam splitter commonly have 2,3,4,5,6,8,*0,*2,*6 etc.

P  series  Degree of division of common 1,2,3,4,6,8.

Y  series  Degree of division of common 6,8,*0,*2,*6,*8,*0,*4,*8,*0,*6 etc.

**0°/**0°- Movementthan:

The stroke angle of the cam angle and the ratio of the still. Also refers to the transposition indexing wheel action time and time duration than the rest. Commonly used *0°/**0°,**0°/**0°,**0°/**0°,**0°/**0°,**0°/**0°,**0°/**0°,**0°/*0°etc.

R- Cam rotation curve:R- D-cam curve,L- L-cam curve.

P Series cam splitter without rotation of the input shaft, an output shaft with reverse gear will be the same type of turn.

When using a cam splitter, splitter to clear speed under load and use, split specifications may choose the size. (If necessary, the company can provide the body model selectioninformation.)

This kind of machine is widely used in various types of disc processing machinery and similar mechanical industry machinery, automation intermittent drive and drive disk. It includes the types of *5DF, *0DF, *0DF, *0DF, **0DF, **0DF, **0DF and **0DF. For detailed technical parameters of each type, please consult us.