Description
Temperature
controller
On/off
PID control
Temperature meter are dual row *-LED display
Input: CU*0; PT**0; K; E; J; T
XMT***8 series intelligent temperature controller, is double row
*-LED display and include on/off, PID control, including with
parameter of self-setting function. This temperature meter
respectively display temperature measurement value (PV) and
temperature set value (SV) under normal mode; When it is time
temperature control, respectively display temperature measurement
value (PV) and running time count down (SV), and also provide kinds
of time control method selection; The controller can input kinds of
signal which are used interchangeably, it adopt ON/OFFP=0PID
control, allowing an easy parameter setting and convenient
inputting, is widely used over temperature automatic control
systems of machinerychemicalceramicslight
industrialmetallurgypetrifaction and heat treatment and so on.
Main
technical Indexes
1, Measurement deviation: ± 0.5F· S± 1, Cold end compensating
deviation± 1C
2, Input(can be selected): CU*0(**0~**0), PT**0(**0~**0),
K(**0~**9),
E(**0~**0), J(**0~**0), T(**9~**0)
3, Relay output contact capacity: AC**0V 7A(resistance load)
Period 2~**0s can be adjusted.
4, Drivng solid relay signal output: Driving electric current *5m A
voltage >9V,
Period is 2S
5, Power: AC*5V~**2V, *0/*0Hz
6, Work environment: Temperature 0~*0.0C, relative humidity≤ *5%RH,
without corrode and strong electric radiation.
Model
sense
XMT( )*6 (
) 8 (
)
1
2 3
4 5
1:External
size and Installation hole(mm)
Empty
**0×*0×*0
**2×*6 A *6×*6×*0
*2×*2
D *2×*2×*0
*8×*8 E
*8×*6×*0
*4×*2
F *6×*8×*0
*2×*4
G *8×*8×**0
*4×*4
S *0×**0×*0
*6×**2 B *0×**0×*0
*6×**6
C *0×**0×*5
wall set installation
2. Operation display
method:'6':
*-key gentel push-switch setting, double row digital display, have
PID adjustment
3. An
additional alarm:
Blank or
'0': indicates no
alarm;'1': High limit touch alarm;'2': low
limit touch alarm
4. Input
signal classification: '8' : Input signal can
interchange free
5. Suffix:
None: relay
output
G: solid state relay output
