Description
**9
Billet, bloom and forge crops.
Billet, bloom, axle, slab, heavy plate and
heavy forge crops, containing not over 0.*5 percent phosphorus or
sulphur and not over 0.5 percent silicon, free from alloys.
Dimensions not less than 2 inches in thickness, not over *8 inches
in width,and not over *6 inches in length.
**0 Bar crops and plate scrap.
Bar crops, plate scrap, forgings, bits,jars,
and tool joints, containing not over 0.*5 percent phosphorus or
sulphur, not over 0.5 percent silicon, free from alloys. Dimensions
not less than ½ inch in thickness, not over *8 inches in width, and
not over *6 inches in length.
**1 Plate and structural steel, 5 feet and
under.
Cut structural and plate scrap, 5 feet and
under. Clean open hearth steel plates, structural shapes, crop
ends, shearings, or broken steel tires. Dimensions not less than ¼
inch thickness, not over 5 feet in length and *8 inches in width.
Phosphorus or sulphur not over 0.*5 percent.
**2 Plate and structural steel, 5 feet and
under.
Cut structural and plate scrap, 5 feet and
under. Clean open hearth steel plates, structural shapes, crop
ends, shearings, or broken steel tires. Dimensions not less than ¼
inch thickness, not over 5 feet in length and *4 inches in width.
Phosphorus or sulphur not over 0.*5 percent.
**3 Cast steel.
Steel castings not over *8 inches long or *8
inches wide,and ¼ inch and over in thickness, containing not over
0.*5 percent phosphorus or sulphur, free from alloys and
attachments. May include heads, gates, and
risers.
**4 Punchings and plate
scrap.
Punchings or stampings, plate scrap,and bar
crops containing not over 0.*5 percent phosphorous or sulphur and
not over 0.5 percent silicon, free from alloys. All materials cut
*2 inches and under, and with the exception of punchings or
stampings, at least 1/8 inch in thickness. Punchings or stampings
under 6 inches in diameter may be any gauge.
**5 Electric furnace
bundles.
New black steel sheet scrap hydraulically
compressed into bundles of size and weight as specified by
consumer.
**6 Cut structural and plate scrap, 3 feet and
under.
Clean open hearth steel plates, structural
shapes, crop ends, shearings, or broken steel tires. Dimensions not
less than 1/4 inch in thickness, not over 3 feet in length and *8
inches in width. Phosphorus or sulphur not over 0.*5
percent.
**7 Cut structural and plate scrap, 2 feet and
under.
Same as cut structural and plate scrap, 3 feet
and under, except for length.
**8 Cut structural and plate scrap, 1 foot and
under.
Same as cut structural and plate scrap, 3 feet
and under, except for length.
**9 Silicon
busheling.
Clean silicon bearing steel scrap, not
exceeding *2 inches in any dimensions, including new factory
busheling (for example,sheet clippings, stampings, etc.), having a
silicon content of 0.*5 percent to 5.0 percent.
**0 Silicon
Clippings.
Clean steel scrap, including new factory
busheling (for example, sheet clippings, stampings, etc.), may not
include old auto body and fender stock. Free of metal coated,
limed,vitreous enameled, and electrical sheet containing minimum
one percent silicon
**1 Chargeable ingots and ingot
butts.
Chargeable ingots and ingot butts for material
to be suitable and acceptable to the consumer containing not over
0.*5 percent phosphorus or sulphur and not over 0.*5 percent
silicon free of alloys.
**2 Foundry steel, 2 feet and
under.
Steel scrap 1/8 inch and over in thickness, not
over 2 feet in length or *8 inches in width. Individual pieces free
from attachments. May not include nonferrous metals,cast or
malleable iron, cable, vitreous enameled, or metal coated
material.
**3 Foundry steel, 1 foot and
under.
Same specifications as *-foot material,except
for length.
**4 Springs and
crankshafts.
Clean automotive springs and crankshafts,either
new or used.
**5 Alloy free
turnings.
Clean shoveling steel turnings free from
lumps,tangled or matted material, iron borings, or excessive oil
containing not more than 0.*5 percent phosphorus or sulphur, and
free of alloys.
**6 Alloy free short shoveling steel
turnings.
Clean shoveling steel turnings, free of lumps,
tangled or matted material, iron borings, or excessive oil,
containing not more than 0.*5 percent phosphorus or sulphur, and
free of alloys.
**7 Alloy free machine shop
turnings.
Clean steel turnings, free of iron borings or
excessive oil, containing not more than 0.*5 percent phosphorus or
sulphur, and free of alloys.May not include badly rusted or
corroded stock.
**8 Hard steel cut *0 inches and
under.
Automotive steel consisting of rear ends,
crankshafts, driveshafts, front axles, springs, and
gears
prepared *0 inches and under. May not include
miscellaneous small shoveling steel or any pieces too bulky for
gray iron foundry use.
**9 Chargeable slab
crops.
Chargeable slab crops for material to be
suitable and acceptable to the consumer containing not over 0.*5
percent phosphorus and 0.*5 percent sulphur and not over 0.*5
percent silicon; free of alloys.
**0 Silicon bundles.
Silicon sheet scrap, clippings or skeleton
scrap,compressed or hand bundled, to charging box size, and
weighing not less than *5 pounds per cubic foot, having a silicon
content of 0.*0 percent to 5.0 percent.
**1 Heavy tumings.
Short, heavy steel turnings, containing not
over 0.*5 percent phosphorus or sulphur and free of alloys.May
include rail chips.May not include machine shop or other light
turnings and must weigh not less than *5 pounds per cubic foot in
the original state of production.
