Description

 TM-F**0L is a high-speed automatic filling and sealing machine,andis done *-across at an impressive****0 cups/hour.The biggest advantage is the high speed,and independent control system which could realize normal outputting of *-across to *-across.It is the most advanced option on the market to fulfill desire to produce high-quality cups at high speed,and keep labor cost in check.
  This machine is driven by motor,and the whole system is ganged,which guarantees stable performance and high speed.We values on reliable performance,so all electrical components and pneumatic components are purchased from high-quality company like Panasonic, Airtac, Schneider, Omron and etc. The rack,charging barrel and parts that directly contacting the material is made of stainless steel **4,and doors are made of organic glass, making it more healthy and safe.The molds that support cups is made of anodized aluminum,which resists acid, base and deformation.The machine equips with a *0.2 inch PLC touch screen,operators can debug the machine in the screen,making it more intuitive and real-time monitoring.The machine will stop when someone opening the door to protect operator,the professional can turn it off in touch screen.There are many photoelectric sensors that giving feedback to alarm and removing the waste. 

1、Big cup storage
  TM-F**0K is a high-speed filling and sealing machine, the operating frequency is about ****0times/minute.Asit done *-across, the production efficiency is ******0cups/minute. The conveyors only contain about **0 cups,so the cups need to be loaded every 2 minutes. Taking labor cost into consideration, the machine is equipped with a big cup storage, so the break of loading cups is increased into ****0minutes.As the distance of filters is twice of cups, every column of cups corresponding two columns of filters. There are photoelectric sensors in the storage, therefore, it will load cups automatically when the quantity is less than the setting.
2、Mechanical gripper
  Cups and filters are all grabbed bymechanical gripper, they move to the top of mold in certain motion trail. Every cup and filter enter the mold correctly as themechanical gripper loosing after the cup and filter gettothe mold. The angle of the grabbing movement is about **0°,soits trail is shorter and the speed is faster than the *0°s.There is a photoelectric sensorbefore the filter grabbing device, and it will not grab the filter unless there is a cup.
3、The stickingmodule
 Themodule is a conical mold with a rectify guide pillar.And there is a cylinder in the middle of guide bar, which sticks the filter into the cup and makes them tightly bound.
4、Filter detecting module
  There is a photoelectric sensor used for detecting whether the filter is stuck in the cup correctly by measuring the distance of guide pillar to the bottom.
5、Feeding system
  The machine is equipped with an accuracyauger feedingmodule drove by servo motor imported from Japan, and an electric motor drove stirring device, making material flowing better and thedeviation can be less than 0.1g.The main part is made of stainlesssteel**4 with visual organic glass window, so the process can be observed by eyes. There is also a photoelectric sensor used for detecting the quantity of material and vacuum loading material automatically when it is less than the setting.
6、Rim-cleaning module
  There is arim-cleaning moduleafter fillingmodule, which is designed according to the structure of cups rim,using vacuum to clean the rim of each cup to eliminate any chance that coffee or some other foreign object might compromise a tight seal.
7、Lidding module
  This module has an original designed lids shelf, which locates the horizontal position of lids with four guide pillars. And there is a conical flapper with four protrudent aluminum in the bottom to hold lids, making it vertical and easy tobeadded.
Lidding module is drove by cylinder and its movement is vertical.The whole sucking and placing movement is accomplished by motion trail and magnetic valve.
8、Heat sealingmodule
  Thismodule is original designed with rectify function, which exerts pressureevenly and seals perfectly. The cylinders controlling the heating heads are independent, therefore, they can be controlled separately ,and wont seal if there is fault in the above steps.Sealing one time is enough, but we reserve another sealing device for line sealing, which makes the seal more pretty and tight.
9、Unqualified products removing module
  The machine is equipped with an unqualified products removingmodule, theunqualified products wont bedischarged, on the contrary, they will be blew to the waste bin and wait to be recycled.