0.5-1T/H animal feed production line, poultry feed pellet making line supplier

The fist key step is to crush all raw material into small particles or powder for feed making.
This self-suction hammer mill is used to absorb the solid materials such as corn, soybean,wheat, sorghum to be crushed. It is made of feeding pipe, rack,rotor,hammer,sieve and discharging channel.
After the raw materials evenly enter into the crushing chamber, they shall be stroken and broken by the high-speed rotating hammers.In the function of airflow, the broken raw materials gradually move along the rotor and quickly crushed by continuous hitting,collision,friction generated from hammers,toothed plate and sieve. The crushed particles or powder is discharged through the holes on the sieve by the centrifugal pressure of the rotor. 

Vertical mixing machine is consist of inlet,rack,body and outlet,it uses the high speed rotating screw to elevate the crushed raw materials from the bottom to the top inside the body, then they are thrown down to the bottom.Such tumbling blending from up and down with several times is done to achieve homogeneous mixing in short time.
(2)feed pellet mill or feed making machine
HKJ**0 feed making machine is the professional machine to press the crushed and mixed raw material into feed pellet with advanced technology.

Feeder is driven by the motor to convey the raw material into conditioner with adjustable speed. It is consist of inlet,shaft, spiral thread and outlet.After the motor is switched on, The shaft rotates at first, then the spiral thread push the raw materila forward to finish conveying.Because the raw material is scattered and make a spiral motion inside the feeder, therefore to avoid the blocking or caking.
Conditoner is a process for heating and watering the raw material powder to improve the feed pellet quality, if saying the feed pellet is **0% prime qualiy, the conditioner function can account for *0 %.

It has four functions:
1.make the raw material powder curing for animal digestion and assimilation.
2.Sterilizing for feed safety with low cost and without drug and pollution.
3.Improve the raw material moisture content to  strenghten the raw material stickiness for pressing more compact feed pellet, the surface is smooth  and easy to store .
4.the raw material powder is soften to easy for pelleting,  improve feed quality and hourly capacity , meanwhile, to longthen the roller and ring die service life because of reducing friction.

Feed pellet formation there are three forces in the pressing chamber to form the final pellet

*Roll force: the force from the roll is acting on the material.This is the force that compresses material or extrudes it through the die holes.
*Die force:This is the force from the die that resists the flow of material though the holes.This force is designed into the system to produce the flow resistance or back pressure that forces individual feed particles together ,where they bond and form pellet. 
*Slip resisting force: finally, there is a frictional force derived from material contact with the die.This partical force keeps the material from squirting along the face of the die in front of the roll.This force is related to the pressure exerted by the roll and  the frictional characteristics of the feed itself.This force is simillar to that which brings a car to a stop when the brakes are applied. 
4.Feed cooling machine 
The feed pellet can be up to ****0 ℃ after it is just produced, therefore the cooling machine is necessary to cool them down.
The cooling principle of this machine is unique,which relies on the reverse movement between the cool wind and the pellets,as a result,the material cools down from the bottom to the top,which avoids the pellets surface from split by sudden cooling.or that the heat dissipating slowing.the machine is of high yield and cooling effect,it is of high automatic degree with low noise and rare maintenance,which is the senior cooling down equipment.

Pls contact us if you are interested in our feed pellet line, we can supply the complete solution !