Automatic metal roofing roll forming
machine
1. Technique parameters of the processing line
(1).Suitable material to process: colored armor plate with the bending intensity of 235MPA;
(2).Thickness of the plate:0.2-0.8mm;
(3).Width of the plate:1000/1220/1250mm;
(4).Productivity:8-12m/min;
(5).Control system:PLC;
(6).Diameter of the roller:75mm;
(7).Dimensions of major structure:6500mm*1500mm*1200mm;
(8).Weight: 3600KGS;
(9).The main power:4KW;
(10).Kind of drive:chains and sprocket wheels;
(11).Material of blade:CR12
2.Processing technique and deployment
Processes:Man-made uncoiler—Roll forming machine—PLC system—Hydraulic system—Mold pressing machine
ï¼Blade—Receiving table
3.some pictures about the machine for your reference
4.Components of line:
|
No. |
Name |
Unit |
Qty |
|
1 |
Man-made uncoiler |
set |
1 |
|
2 |
Main machine for roll forming |
set |
1 |
|
3 |
Control system |
set |
1 |
|
4 |
Hydraulic system |
set |
1 |
|
5 |
Blade |
set |
1 |
|
6 |
Receiving table |
set |
2 |
5.Summary of the structure
(1)Common uncoiler
Functional and structural characteristics
：It is used to support the steel coil and uncoil it in a turnable way.The steel coil is uncoiled by hand.The uncoiler can bear 5t.It is suitable to process the coiled steel with the inside diameter
508mm
(2)Feeding the material into the platform:
Functional and structural characteristics
：put the rawmaterial(steel srip) on the plat to manufacture and process, it can
guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
(3)Molding core:
Functional and structural characteristics
：In order to keep the product shape and precision,adopts welded sheet
structure, motor reducer drive,chain transmission, roller surfaces polishing,hard plating, heat treatment and
galvanizational treatment . The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stampted.
Rolling galvanizational thickness:0.03mm
Rolling material: Forging Steel 45#
(4)Shearing mechanism:
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Match equipment: It contains one set of cutting tools, one hydraulic tank and one cutter machine.
Material of the cutting blade: Gcr12
(5)Hydraulic system:
It is controlled by gear wheel oil pump.After filling the hydraulic oil into the hydraulic oil tank, the pump drive the
cutter machine to begin the cutting job.Match equipment: The system includes a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes.and one set of electromagnetism valve.
Power of the oil pump: 3kw;
Hydraulic oil: 40#.
(6) Computer control cabinet:
It adopts Siemens to control. The target pieces length is adjustable and digit of it can be adjusted. Computed mode
has two modes: automatic and manual one. The system is easy to operate and use.
There is converter in it so that reduced the error.
(7) Molded pieces receiving table
It adopts welded steel and supported roller to transmit the products.There are two frames with the length of
4m/one(or 2m/one of two).
(8) The important parts on the machine:
A Encoder
B Encoder wheel
C Limit switches
D Main motor
