Description
High temp. resistant silicon steel sheets adhesives(THO****1)
Outline It is double-component epoxy adhesive. It is easy and
convenient to use for it cures fast at room temperature and
bonds well. The surface of the bonding is bright and smooth.
Applications This product is especially applied to bonding
silicon steel sheets. It also applies to the bonding, sealing,
filling transformer and magnetic materials.
Features The A component is clear, The B component is
transparent liquid.
Fast curing speed. At *5 °C, within **3 hour, the surface cures,
and 2 days later, it reaches its maximum bonding strength.
Being durable and resistant to ultraviolet light, once the bond has
formed.
Being heat-resistant, it adapts to a wide range of temperature and
bonds well under high temperature.
Mix the two components in a certain proportion, apply it to the
surface of the substrates directly, which makes it so convenient to
use.
You.ll see long term durability and resistance to moisture,
chemicals, oils, and temperature extremes.
Non-toxic after solidification, though it is a little smelly.
Shelf life is one and half a year.
The main technical parameters are as follows:
Temp. resistance scope:**0 °C-***0 °C
at room temperature: Tensile strength≥*5MPa; Shearing
strength≥*8MPa peeling strength: *9KN/M
at **0°C tensile strength **5 Mpa volume
resistance: (*5°C)
1×***5Ω.cm
surface resistance 2.5×***5Ω.cm
voltage resistance ****5kV/mm hardness shore
D *5 water absorbing capacity
*4h<0.1% Tg:**0°C
Instruction 1. Clean the surface of the material, make sure
they have no dust or oil on them, wait until they are dry.
2. Mix A and B in a proportion of 3:**1.2 to get perfect bonding
result at fastest speed at *5 °C
3. Spread the mixture on the substrates, put them together and
apply some strength on them, finally, let them dry for **4
hours.
Notes 1. Use another can or container to blend A with B. The
tools used to get A and B should be different.
2. A and B should be mixed well.
3. It is necessary to keep it well ventilated and away from
fire.
4. If it has contact with skin, you should wash thoroughly with
soap and water.
5. It can be stored at well-ventilated places with low temperature,
and keep them away from fire.
6. Cover the lip after using it.
